Absolute minimal neomutt config delete the builtin imap

Add oflineimap with mutt support

.gitignore

@@ -1,3 +1,6 @@
 # Ignore the yazi packages and only store the commit in the dotfiles
-/cli/dot-config/yazi/flavors
+cli/dot-config/yazi/flavors
-/cli/dot-config/yazi/plugins
+cli/dot-config/yazi/plugins
+
+# Security
+cli/dot-config/weechat/sec.conf

Makefile

@@ -0,0 +1,22 @@
+# Makefile to adptop all dotfiles in this repo
+
+# Source - https://stackoverflow.com
+# Posted by Konstantin Smolyanin, modified by community. See post 'Timeline' for change history
+# Retrieved 2025-12-30, License - CC BY-SA 4.0
+
+define sto
+	stow --adopt -v --dotfiles $(1)
+endef
+
+all:
+	# Target to stow everything in this repo
+	git add .
+	-git commit -a -m "AutoSave - For reset"
+
+	# Possibly with adoptation
+	$(call sto,cli)
+	$(call sto,gui)
+	$(call sto,home)
+
+	# Reset to the last autosave (optional)
+	#git reset --hard HEAD

README.md

@@ -9,3 +9,9 @@ Be sure to only use the `stow.sh` wrapper scripts as this sets some defaults.
 ## Additional
 
 Setup `rlone` host `Strato` for the automatic webdav mounting to work. This is automatically done when using hyprland.
+
+## Secrets
+
+Be sure to configure `pass` to implement the following passwords
+- uniimap
+- gmximap

all.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-bash stow.sh cli
-bash stow.sh gui
-bash stow.sh home

cli/dot-config/aerc/accounts.conf

@@ -0,0 +1,17 @@
+[PersonalGmx]
+source        = imaps://jonashahn1%40gmx.net@imap.gmx.net:993
+outgoing      = smtp://jonashahn1%40gmx.net@mail.gmx.net:587
+source-cred-cmd = pass gmximap
+outgoing-cred-cmd = pass gmximap
+default       = INBOX
+from          = Jonas Hahn <jonashahn1@gmx.net>
+cache-headers = true
+
+[Uni]
+source        = imaps://ug-student%5Cj.hahn02@email.stud.uni-goettingen.de:993
+outgoing      = smtp://ug-student%5Cj.hahn02@email.stud.uni-goettingen.de:25
+source-cred-cmd = pass uniimap
+outgoing-cred-cmd = pass uniimap
+default       = INBOX
+from          = Jonas Hahn <j.hahn02@stud.uni-goettingen.de>
+cache-headers = true

cli/dot-config/aerc/aerc.conf

@@ -0,0 +1,889 @@
+#
+# aerc main configuration
+
+[general]
+#
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+#unsafe-accounts-conf=false
+
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+#log-file=
+
+# Only log messages above the specified level to log-file. Supported levels
+# are: trace, debug, info, warn and error. When redirecting aerc's output to
+# a file using > shell redirection, this setting is ignored and the log level
+# is forced to trace.
+#
+# Default: info
+#log-level=info
+
+# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
+# in an existing aerc instance, and don't start an IPC server to allow
+# subsequent aerc instances to run commands in the current one.
+#
+# Default: false
+#disable-ipc=false
+
+# Don't run mailto:... commands over IPC; start a new aerc instance with the
+# composer instead.
+#
+# Default: false
+#disable-ipc-mailto=false
+#
+# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
+# file instead.
+#
+# Default: false
+#disable-ipc-mbox=false
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: flags:4,name<20%,subject,date>=
+#index-columns=flags:4,name<20%,subject,date>=
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-flags={{.Flags | join ""}}
+#column-name={{index (.From | names) 0}}
+#column-subject={{.ThreadPrefix}}{{.Subject}}
+#column-date={{.DateAutoFormat .Date.Local}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006 Jan 02
+#timestamp-format=2006 Jan 02
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is empty, timestamp-format is used instead.
+#
+# Default: 15:04
+#this-day-time-format=15:04
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is empty, timestamp-format is used instead.
+#
+# Default: Jan 02
+#this-week-time-format=Jan 02
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is empty, timestamp-format is used instead.
+#
+#Default: Jan 02
+#this-year-time-format=Jan 02
+
+#
+# Overrides timestamp-format for the message view.
+#
+# Default: 2006 Jan 02, 15:04 GMT-0700
+#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700
+
+#
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent today.
+#
+#message-view-this-day-time-format=
+
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent within the last 7 days.
+#
+#message-view-this-week-time-format=
+
+#
+# If set, overrides *timestamp-format* in the message view for messages
+# that were received/sent this year.
+#
+#message-view-this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 22
+#sidebar-width=22
+
+#
+# Default split layout for message list tabs. The syntax is:
+#
+#       [<direction>] <size>
+#
+# <direction> is optional and defaults to horizontal. It can take one
+# of the following values: h, horiz, horizontal, v, vert, vertical.
+#
+# <size> is a positive integer representing the size (in terminal cells)
+# of the message list window.
+#
+#message-list-split=
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+#mouse-enabled=false
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+#
+# Template to use for Composer tab titles
+#
+# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+
+#
+# Template to use for Terminal tab titles. Only valid in the global [ui]
+# section.
+#
+# Default: {{.Title}}
+#tab-title-terminal={{.Title}}
+
+#
+# Template to use for Message Viewer tab titles
+#
+# Default: {{.Subject}}
+#tab-title-viewer={{.Subject}}
+
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+#dirlist-left={{.Folder}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
+#dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+#dirlist-tree=false
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+#dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+#sort=
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# Specifies whether the _seen_ flag of messages being previewed in the message
+# list split should be automatically set to _true_ after a delay, controlled by
+# _auto-mark-read-split-delay_.
+#
+# Default: false
+#auto-mark-read-split=false
+
+# If _auto-mark-read-split_ is true, specifies the number of seconds after
+# which a message previewed in the message list split must considered _seen_.
+#
+# Default: 3s
+#auto-mark-read-split-delay=3s
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /nix/store/sz64qbk1cks6gmmq5k9zjx9ps6cf369w-aerc-0.21.0/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: "│" and "─"
+#border-char-vertical="│"
+#border-char-horizontal="─"
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+#styleset-name=default
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the message threads. Default order is the initial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Positions the cursor on the last message in the message list (at the
+# bottom of the view) when opening a new folder.
+#
+# Default: false
+#select-last-message=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. If this option is set to false and
+# threading-by-subject is set to true, then siblings will be ordered by subject
+# headers using UTF-8 sorting.
+#
+# This option is only applicable for client-side threading with a backend that
+# enables sorting. Note that there's a performance impact when sorting is
+# activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+# Set the scroll offset in number of lines from the top and bottom of the
+# message list.
+#
+# Default: 0
+#msglist-scroll-offset = 0
+
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# If no References nor In-Reply-To headers can be matched to build client side
+# threads, fallback to similar subjects. This setting also affects how thread
+# siblings are ordered when sort-thread-siblings is left to false.
+#
+# Default: false
+#threading-by-subject=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: "+"
+#thread-prefix-folded = "+"
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the thread prefix appearance by selecting the connector for dummy
+# thread.
+#
+# Default: "┬─"
+#thread-prefix-dummy = "┬─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# dummy thread.
+#
+# Default: "┴─"
+#thread-prefix-dummy-reverse = "┴─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}} | {{cwd}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+#pager=less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+#
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+#edit-headers=false
+
+#
+# Sets focus to the email body when the composer window opens.
+#
+# Default: false
+#focus-body=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurrence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+#format-flowed=false
+
+[multipart-converters]
+#
+# Converters allow to generate multipart/alternative messages by converting the
+# main text/plain part into any other MIME type. Only exact MIME types are
+# accepted. The commands are invoked with sh -c and are expected to output
+# valid UTF-8 text.
+#
+# Example (obviously, this requires that you write your main text/plain body
+# using the markdown syntax):
+#text/html=pandoc -f markdown -t html --standalone
+
+[filters]
+#
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /nix/store/sz64qbk1cks6gmmq5k9zjx9ps6cf369w-aerc-0.21.0/libexec/aerc/filters
+#   /nix/store/sz64qbk1cks6gmmq5k9zjx9ps6cf369w-aerc-0.21.0/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+#text/html=pandoc -f html -t plain | colorize
+text/html=! html
+#text/html=! w3m -T text/html -I UTF-8
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+#
+# Executed when notmuch tags are modified.
+#tag-modified=
+
+#
+# Executed when flags are changed on a message.
+#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+[templates]
+# Templates are used to populate email bodies automatically.
+#
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /nix/store/sz64qbk1cks6gmmq5k9zjx9ps6cf369w-aerc-0.21.0/share/aerc/templates
+#
+#template-dirs=
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body

cli/dot-config/aerc/binds.conf

@@ -0,0 +1,199 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+\[t = :prev-tab<Enter>
+\]t = :next-tab<Enter>
+<C-t> = :term<Enter>
+? = :help keys<Enter>
+<C-c> = :prompt 'Quit?' quit<Enter>
+<C-q> = :prompt 'Quit?' quit<Enter>
+<C-z> = :suspend<Enter>
+
+[messages]
+q = :prompt 'Quit?' quit<Enter>
+
+# Some useful git stuff
+ga = :flag<Enter>:pipe -mb git am -3<Enter>
+gb = :term git am --abort<Enter>
+gs = :term git am --show-current-patch=diff<Enter>
+gl = :term git log<Enter>
+
+# Reload
+rl = :reload<Enter>
+
+lf = :flag<Enter>
+lu = :unflag<Enter>
+
+j = :next<Enter>
+<Down> = :next<Enter>
+<C-d> = :next 50%<Enter>
+<C-f> = :next 100%<Enter>
+<PgDn> = :next 100%<Enter>
+
+k = :prev<Enter>
+<Up> = :prev<Enter>
+<C-u> = :prev 50%<Enter>
+<C-b> = :prev 100%<Enter>
+<PgUp> = :prev 100%<Enter>
+gg = :select 0<Enter>
+G = :select -1<Enter>
+
+J = :next-folder<Enter>
+<C-Down> = :next-folder<Enter>
+K = :prev-folder<Enter>
+<C-Up> = :prev-folder<Enter>
+H = :collapse-folder<Enter>
+<C-Left> = :collapse-folder<Enter>
+L = :expand-folder<Enter>
+<C-Right> = :expand-folder<Enter>
+
+v = :mark -t<Enter>
+<Space> = :mark -t<Enter>:next<Enter>
+V = :mark -v<Enter>
+
+T = :toggle-threads<Enter>
+zc = :fold<Enter>
+zo = :unfold<Enter>
+za = :fold -t<Enter>
+zM = :fold -a<Enter>
+zR = :unfold -a<Enter>
+<tab> = :fold -t<Enter>
+
+zz = :align center<Enter>
+zt = :align top<Enter>
+zb = :align bottom<Enter>
+
+<Enter> = :view<Enter>
+d = :choose -o y 'Really delete this message' delete-message<Enter>
+D = :delete<Enter>
+a = :archive flat<Enter>
+A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter>
+
+C = :compose<Enter>
+m = :compose<Enter>
+
+b = :bounce<space>
+
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+c = :cf<space>
+$ = :term<space>
+! = :term<space>
+| = :pipe<space>
+
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+<Esc> = :clear<Enter>
+
+s = :split<Enter>
+S = :vsplit<Enter>
+
+pl = :patch list<Enter>
+pa = :patch apply <Tab>
+pd = :patch drop <Tab>
+pb = :patch rebase<Enter>
+pt = :patch term<Enter>
+ps = :patch switch <Tab>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+/ = :toggle-key-passthrough<Enter>/
+q = :close<Enter>
+O = :open<Enter>
+o = :open<Enter>
+S = :save<space>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+<C-y> = :copy-link <space>
+<C-l> = :open-link <space>
+
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+H = :toggle-headers<Enter>
+<C-k> = :prev-part<Enter>
+<C-Up> = :prev-part<Enter>
+<C-j> = :next-part<Enter>
+<C-Down> = :next-part<Enter>
+J = :next<Enter>
+<C-Right> = :next<Enter>
+K = :prev<Enter>
+<C-Left> = :prev<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# Keybindings used when the embedded terminal is not selected in the compose
+# view
+$noinherit = true
+$ex = <C-x>
+$complete = <C-o>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<A-p> = :switch-account -p<Enter>
+<C-Left> = :switch-account -p<Enter>
+<A-n> = :switch-account -n<Enter>
+<C-Right> = :switch-account -n<Enter>
+<tab> = :next-field<Enter>
+<backtab> = :prev-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::editor]
+# Keybindings used when the embedded terminal is selected in the compose view
+$noinherit = true
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::review]
+# Keybindings used when reviewing a message to be sent
+# Inline comments are used as descriptions on the review screen
+y = :send<Enter> # Send
+n = :abort<Enter> # Abort (discard message, no confirmation)
+s = :sign<Enter> # Toggle signing
+x = :encrypt<Enter> # Toggle encryption to all recipients
+v = :preview<Enter> # Preview message
+p = :postpone<Enter> # Postpone
+q = :choose -o d discard abort -o p postpone postpone<Enter> # Abort or postpone
+e = :edit<Enter> # Edit (body and headers)
+a = :attach<space> # Add attachment
+d = :detach<space> # Remove attachment
+
+[terminal]
+$noinherit = true
+$ex = <C-x>
+
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-PgDn> = :next-tab<Enter>

cli/dot-config/btop/btop.conf

@@ -1,4 +1,4 @@
-#? Config file for btop v. 1.4.4
+#? Config file for btop v. 1.4.5
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
@@ -57,13 +57,13 @@ update_ms = 2000
 
 #* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
 #* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
-proc_sorting = "user"
+proc_sorting = "cpu direct"
 
 #* Reverse sorting order, True or False.
-proc_reversed = True
+proc_reversed = False
 
 #* Show processes as a tree.
-proc_tree = True
+proc_tree = False
 
 #* Use the cpu graph colors in the process list.
 proc_colors = True
@@ -115,6 +115,9 @@ cpu_bottom = False
 #* Shows the system uptime in the CPU box.
 show_uptime = True
 
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = True
+
 #* Show cpu temperature.
 check_temp = True
 
@@ -187,7 +190,7 @@ disk_free_priv = False
 show_io_stat = True
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
+io_mode = True
 
 #* Set to True to show combined read/write io graphs in io mode.
 io_graph_combined = False

cli/dot-config/fish/completions/fisher.fish

@@ -0,0 +1,7 @@
+complete --command fisher --exclusive --long help --description "Print help"
+complete --command fisher --exclusive --long version --description "Print version"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments install --description "Install plugins"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments update --description "Update installed plugins"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments remove --description "Remove installed plugins"
+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments list --description "List installed plugins matching regex"
+complete --command fisher --exclusive --condition "__fish_seen_subcommand_from update remove" --arguments "(fisher list)"

cli/dot-config/fish/config.fish

@@ -0,0 +1,10 @@
+if status is-interactive
+    # Commands to run in interactive sessions can go here
+    alias helix="hx"
+    alias shd="shutdown now"
+    alias l="lazygit"
+
+    theme_gruvbox dark hard
+
+    zoxide init fish | source
+end

cli/dot-config/fish/fish_plugins

@@ -0,0 +1,2 @@
+jorgebucaran/fisher
+jomik/fish-gruvbox

cli/dot-config/fish/fish_variables

@@ -0,0 +1,48 @@
+# This file contains fish universal variable definitions.
+# VERSION: 3.0
+SETUVAR --export EDITOR:hx
+SETUVAR __fish_initialized:3800
+SETUVAR _fisher_jomik_2F_fish_2D_gruvbox_files:\x7e/\x2econfig/fish/functions/theme_gruvbox\x2efish
+SETUVAR _fisher_jorgebucaran_2F_fisher_files:\x7e/\x2econfig/fish/functions/fisher\x2efish\x1e\x7e/\x2econfig/fish/completions/fisher\x2efish
+SETUVAR _fisher_plugins:jorgebucaran/fisher\x1ejomik/fish\x2dgruvbox
+SETUVAR _fisher_upgraded_to_4_4:\x1d
+SETUVAR fish_color_autosuggestion:585858
+SETUVAR fish_color_cancel:\x2d\x2dreverse
+SETUVAR fish_color_command:a1b56c
+SETUVAR fish_color_comment:f7ca88
+SETUVAR fish_color_cwd:green
+SETUVAR fish_color_cwd_root:red
+SETUVAR fish_color_end:ba8baf
+SETUVAR fish_color_error:ab4642
+SETUVAR fish_color_escape:86c1b9
+SETUVAR fish_color_history_current:\x2d\x2dbold
+SETUVAR fish_color_host:normal
+SETUVAR fish_color_host_remote:yellow
+SETUVAR fish_color_keyword:a1b56c
+SETUVAR fish_color_normal:normal
+SETUVAR fish_color_operator:7cafc2
+SETUVAR fish_color_option:d8d8d8
+SETUVAR fish_color_param:d8d8d8
+SETUVAR fish_color_quote:f7ca88
+SETUVAR fish_color_redirection:d8d8d8
+SETUVAR fish_color_search_match:white\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dbrblack
+SETUVAR fish_color_selection:white\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dbrblack
+SETUVAR fish_color_status:red
+SETUVAR fish_color_user:brgreen
+SETUVAR fish_color_valid_path:\x2d\x2dunderline\x3dsingle
+SETUVAR fish_greeting:\U0001f41f
+SETUVAR fish_key_bindings:fish_default_key_bindings
+SETUVAR fish_pager_color_background:\x1d
+SETUVAR fish_pager_color_completion:normal
+SETUVAR fish_pager_color_description:B3A06D
+SETUVAR fish_pager_color_prefix:normal\x1e\x2d\x2dbold\x1e\x2d\x2dunderline\x3dsingle
+SETUVAR fish_pager_color_progress:brwhite\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dcyan
+SETUVAR fish_pager_color_secondary_background:\x1d
+SETUVAR fish_pager_color_secondary_completion:\x1d
+SETUVAR fish_pager_color_secondary_description:\x1d
+SETUVAR fish_pager_color_secondary_prefix:\x1d
+SETUVAR fish_pager_color_selected_background:\x2d\x2dbackground\x3dbrblack
+SETUVAR fish_pager_color_selected_completion:\x1d
+SETUVAR fish_pager_color_selected_description:\x1d
+SETUVAR fish_pager_color_selected_prefix:\x1d
+SETUVAR fish_user_paths:/home/jonas/projects/scripts/other\x1e/home/jonas/projects/scripts\x1e/home/jonas/\x2ecargo/bin\x1e/home/jonas/\x2elocal/bin

cli/dot-config/fish/functions/fisher.fish

@@ -0,0 +1,240 @@
+function fisher --argument-names cmd --description "A plugin manager for Fish"
+    set --query fisher_path || set --local fisher_path $__fish_config_dir
+    set --local fisher_version 4.4.5
+    set --local fish_plugins $__fish_config_dir/fish_plugins
+
+    switch "$cmd"
+        case -v --version
+            echo "fisher, version $fisher_version"
+        case "" -h --help
+            echo "Usage: fisher install <plugins...>  Install plugins"
+            echo "       fisher remove  <plugins...>  Remove installed plugins"
+            echo "       fisher update  <plugins...>  Update installed plugins"
+            echo "       fisher update                Update all installed plugins"
+            echo "       fisher list    [<regex>]     List installed plugins matching regex"
+            echo "Options:"
+            echo "       -v, --version  Print version"
+            echo "       -h, --help     Print this help message"
+            echo "Variables:"
+            echo "       \$fisher_path  Plugin installation path. Default: $__fish_config_dir" | string replace --regex -- $HOME \~
+        case ls list
+            string match --entire --regex -- "$argv[2]" $_fisher_plugins
+        case install update remove
+            isatty || read --local --null --array stdin && set --append argv $stdin
+
+            set --local install_plugins
+            set --local update_plugins
+            set --local remove_plugins
+            set --local arg_plugins $argv[2..-1]
+            set --local old_plugins $_fisher_plugins
+            set --local new_plugins
+
+            test -e $fish_plugins && set --local file_plugins (string match --regex -- '^[^\s]+$' <$fish_plugins | string replace -- \~ ~)
+
+            if ! set --query argv[2]
+                if test "$cmd" != update
+                    echo "fisher: Not enough arguments for command: \"$cmd\"" >&2 && return 1
+                else if ! set --query file_plugins
+                    echo "fisher: \"$fish_plugins\" file not found: \"$cmd\"" >&2 && return 1
+                end
+                set arg_plugins $file_plugins
+            end
+
+            for plugin in $arg_plugins
+                set plugin (test -e "$plugin" && realpath $plugin || string lower -- $plugin)
+                contains -- "$plugin" $new_plugins || set --append new_plugins $plugin
+            end
+
+            if set --query argv[2]
+                for plugin in $new_plugins
+                    if contains -- "$plugin" $old_plugins
+                        test "$cmd" = remove &&
+                            set --append remove_plugins $plugin ||
+                            set --append update_plugins $plugin
+                    else if test "$cmd" = install
+                        set --append install_plugins $plugin
+                    else
+                        echo "fisher: Plugin not installed: \"$plugin\"" >&2 && return 1
+                    end
+                end
+            else
+                for plugin in $new_plugins
+                    contains -- "$plugin" $old_plugins &&
+                        set --append update_plugins $plugin ||
+                        set --append install_plugins $plugin
+                end
+
+                for plugin in $old_plugins
+                    contains -- "$plugin" $new_plugins || set --append remove_plugins $plugin
+                end
+            end
+
+            set --local pid_list
+            set --local source_plugins
+            set --local fetch_plugins $update_plugins $install_plugins
+            set --local fish_path (status fish-path)
+
+            echo (set_color --bold)fisher $cmd version $fisher_version(set_color normal)
+
+            for plugin in $fetch_plugins
+                set --local source (command mktemp -d)
+                set --append source_plugins $source
+
+                command mkdir -p $source/{completions,conf.d,themes,functions}
+
+                $fish_path --command "
+                    if test -e $plugin
+                        command cp -Rf $plugin/* $source
+                    else
+                        set temp (command mktemp -d)
+                        set repo (string split -- \@ $plugin) || set repo[2] HEAD
+
+                        if set path (string replace --regex -- '^(https://)?gitlab.com/' '' \$repo[1])
+                            set name (string split -- / \$path)[-1]
+                            set url https://gitlab.com/\$path/-/archive/\$repo[2]/\$name-\$repo[2].tar.gz
+                        else
+                            set url https://api.github.com/repos/\$repo[1]/tarball/\$repo[2]
+                        end
+
+                        echo Fetching (set_color --underline)\$url(set_color normal)
+
+                        if command curl -q --silent -L \$url | command tar -xzC \$temp -f - 2>/dev/null
+                            command cp -Rf \$temp/*/* $source
+                        else
+                            echo fisher: Invalid plugin name or host unavailable: \\\"$plugin\\\" >&2
+                            command rm -rf $source
+                        end
+
+                        command rm -rf \$temp
+                    end
+
+                    set files $source/* && string match --quiet --regex -- .+\.fish\\\$ \$files
+                " &
+
+                set --append pid_list (jobs --last --pid)
+            end
+
+            wait $pid_list 2>/dev/null
+
+            for plugin in $fetch_plugins
+                if set --local source $source_plugins[(contains --index -- "$plugin" $fetch_plugins)] && test ! -e $source
+                    if set --local index (contains --index -- "$plugin" $install_plugins)
+                        set --erase install_plugins[$index]
+                    else
+                        set --erase update_plugins[(contains --index -- "$plugin" $update_plugins)]
+                    end
+                end
+            end
+
+            for plugin in $update_plugins $remove_plugins
+                if set --local index (contains --index -- "$plugin" $_fisher_plugins)
+                    set --local plugin_files_var _fisher_(string escape --style=var -- $plugin)_files
+
+                    if contains -- "$plugin" $remove_plugins
+                        for name in (string replace --filter --regex -- '.+/conf\.d/([^/]+)\.fish$' '$1' $$plugin_files_var)
+                            emit {$name}_uninstall
+                        end
+                        printf "%s\n" Removing\ (set_color red --bold)$plugin(set_color normal) "         "$$plugin_files_var | string replace -- \~ ~
+                        set --erase _fisher_plugins[$index]
+                    end
+
+                    command rm -rf (string replace -- \~ ~ $$plugin_files_var)
+
+                    functions --erase (string replace --filter --regex -- '.+/functions/([^/]+)\.fish$' '$1' $$plugin_files_var)
+
+                    for name in (string replace --filter --regex -- '.+/completions/([^/]+)\.fish$' '$1' $$plugin_files_var)
+                        complete --erase --command $name
+                    end
+
+                    set --erase $plugin_files_var
+                end
+            end
+
+            if set --query update_plugins[1] || set --query install_plugins[1]
+                command mkdir -p $fisher_path/{functions,themes,conf.d,completions}
+            end
+
+            for plugin in $update_plugins $install_plugins
+                set --local source $source_plugins[(contains --index -- "$plugin" $fetch_plugins)]
+                set --local files $source/{functions,themes,conf.d,completions}/*
+
+                if set --local index (contains --index -- $plugin $install_plugins)
+                    set --local user_files $fisher_path/{functions,themes,conf.d,completions}/*
+                    set --local conflict_files
+
+                    for file in (string replace -- $source/ $fisher_path/ $files)
+                        contains -- $file $user_files && set --append conflict_files $file
+                    end
+
+                    if set --query conflict_files[1] && set --erase install_plugins[$index]
+                        echo -s "fisher: Cannot install \"$plugin\": please remove or move conflicting files first:" \n"        "$conflict_files >&2
+                        continue
+                    end
+                end
+
+                for file in (string replace -- $source/ "" $files)
+                    command cp -RLf $source/$file $fisher_path/$file
+                end
+
+                set --local plugin_files_var _fisher_(string escape --style=var -- $plugin)_files
+
+                set --query files[1] && set --universal $plugin_files_var (string replace -- $source $fisher_path $files | string replace -- ~ \~)
+
+                contains -- $plugin $_fisher_plugins || set --universal --append _fisher_plugins $plugin
+                contains -- $plugin $install_plugins && set --local event install || set --local event update
+
+                printf "%s\n" Installing\ (set_color --bold)$plugin(set_color normal) "           "$$plugin_files_var | string replace -- \~ ~
+
+                for file in (string match --regex -- '.+/[^/]+\.fish$' $$plugin_files_var | string replace -- \~ ~)
+                    source $file
+                    if set --local name (string replace --regex -- '.+conf\.d/([^/]+)\.fish$' '$1' $file)
+                        emit {$name}_$event
+                    end
+                end
+            end
+
+            command rm -rf $source_plugins
+
+            if set --query _fisher_plugins[1]
+                set --local commit_plugins
+
+                for plugin in $file_plugins
+                    contains -- (string lower -- $plugin) (string lower -- $_fisher_plugins) && set --append commit_plugins $plugin
+                end
+
+                for plugin in $_fisher_plugins
+                    contains -- (string lower -- $plugin) (string lower -- $commit_plugins) || set --append commit_plugins $plugin
+                end
+
+                string replace --regex -- $HOME \~ $commit_plugins >$fish_plugins
+            else
+                set --erase _fisher_plugins
+                command rm -f $fish_plugins
+            end
+
+            set --local total (count $install_plugins) (count $update_plugins) (count $remove_plugins)
+
+            test "$total" != "0 0 0" && echo (string join ", " (
+                test $total[1] = 0 || echo "Installed $total[1]") (
+                test $total[2] = 0 || echo "Updated $total[2]") (
+                test $total[3] = 0 || echo "Removed $total[3]")
+            ) plugin/s
+        case \*
+            echo "fisher: Unknown command: \"$cmd\"" >&2 && return 1
+    end
+end
+
+if ! set --query _fisher_upgraded_to_4_4
+    set --universal _fisher_upgraded_to_4_4
+    if functions --query _fisher_list
+        set --query XDG_DATA_HOME[1] || set --local XDG_DATA_HOME ~/.local/share
+        command rm -rf $XDG_DATA_HOME/fisher
+        functions --erase _fisher_{list,plugin_parse}
+        fisher update >/dev/null 2>/dev/null
+    else
+        for var in (set --names | string match --entire --regex '^_fisher_.+_files$')
+            set $var (string replace -- ~ \~ $$var)
+        end
+        functions --erase _fisher_fish_postexec
+    end
+end

cli/dot-config/fish/functions/r.fish

@@ -0,0 +1,8 @@
+function r
+    set tmp (mktemp -t "yazi-cwd.XXXXXX")
+    yazi $argv --cwd-file="$tmp"
+    if read -z cwd <"$tmp"; and [ -n "$cwd" ]; and [ "$cwd" != "$PWD" ]
+        builtin cd -- "$cwd"
+    end
+    rm -f -- "$tmp"
+end

cli/dot-config/fish/functions/serve.fish

@@ -0,0 +1,15 @@
+function serve --description "Start a simple HTTP server"
+    set port 8000
+    if test (count $argv) -gt 0
+        set port $argv[1]
+    end
+
+    if command -v python3 >/dev/null
+        python3 -m http.server $port
+    else if command -v python >/dev/null
+        python -m SimpleHTTPServer $port
+    else
+        echo "Python not found"
+        return 1
+    end
+end

cli/dot-config/fish/functions/theme_gruvbox.fish

@@ -0,0 +1,141 @@
+#!/usr/bin/fish
+function theme_gruvbox --description 'Apply gruvbox theme'
+  set -l mode 'light'
+  if test  (count $argv) -gt 0
+    set mode $argv[1]
+  end
+
+  set -g contrast 'medium'
+  if test  (count $argv) -gt 1
+    set contrast $argv[2]
+  end
+
+  switch $contrast
+  case 'soft'
+  case 'medium'
+  case 'hard'
+  case '*'
+      set_color $fish_color_error
+      echo 'Unknown contrast $contrast, choose soft, medium or hard'
+      set_color $fish_color_normal
+      return 1
+  end
+
+  switch $mode
+    case 'light'
+      __theme_gruvbox_base
+      __theme_gruvbox_light
+    case 'dark'
+      __theme_gruvbox_base
+      __theme_gruvbox_dark
+    case '*'
+      set_color $fish_color_error
+      echo 'Unknown mode $mode, choose light or dark'
+      set_color $fish_color_normal
+      return 1
+  end
+  __theme_gruvbox_palette
+  return 0
+end
+
+function __theme_gruvbox_base
+  __printf_color 1 'cc/24/1d'
+  __printf_color 2 '98/97/1a'
+  __printf_color 3 'd7/99/21'
+  __printf_color 4 '45/85/88'
+  __printf_color 5 'b1/62/86'
+  __printf_color 6 '68/9d/6a'
+end
+
+function __theme_gruvbox_light
+  set -l bg 'fb/f1/c7'
+  switch $contrast
+    case "soft"
+      set bg 'f2/e5/bc'
+    case "hard"
+      set bg 'f9/f5/d7'
+  end
+  command printf "\033]11;rgb:$bg\007"
+
+  set -l fg '3c/38/36'
+  command printf "\033]10;rgb:$fg\007"
+
+  __printf_color 0 $bg
+  __printf_color 7 '7c/6f/64'
+  __printf_color 8 '92/83/74'
+  __printf_color 9 '9d/00/06'
+  __printf_color 10 '79/74/0e'
+  __printf_color 11 'b5/76/14'
+  __printf_color 12 '07/66/78'
+  __printf_color 13 '8f/3f/71'
+  __printf_color 14 '42/7b/58'
+  __printf_color 15 $fg
+end
+
+function __theme_gruvbox_dark
+  set -l bg '28/28/28'
+  switch $contrast
+    case "soft"
+      set bg '32/30/2f'
+    case "hard"
+      set bg '1d/20/21'
+  end
+  command printf "\033]11;rgb:$bg\007"
+
+  set -l fg 'eb/db/b2'
+  command printf "\033]10;rgb:$fg\007"
+
+  __printf_color 0 $bg
+  __printf_color 7 'a8/99/84'
+  __printf_color 8 '92/83/74'
+  __printf_color 9 'fb/59/34'
+  __printf_color 10 'b8/bb/26'
+  __printf_color 11 'fa/bd/2f'
+  __printf_color 12 '83/a5/98'
+  __printf_color 13 'd3/86/9b'
+  __printf_color 14 '8e/c0/7c'
+  __printf_color 15 $fg
+end
+
+function __theme_gruvbox_palette
+  __printf_color 236 '32/30/2f'
+  __printf_color 234 '1d/20/21'
+
+  __printf_color 235 '28/28/28'
+  __printf_color 237 '3c/38/36'
+  __printf_color 239 '50/49/45'
+  __printf_color 241 '66/5c/54'
+  __printf_color 243 '7c/6f/64'
+
+  __printf_color 244 '92/83/74'
+  __printf_color 245 '92/83/74'
+
+  __printf_color 228 'f2/e5/bc'
+  __printf_color 230 'f9/f5/d7'
+
+  __printf_color 229 'fb/f1/c7'
+  __printf_color 223 'eb/db/b2'
+  __printf_color 250 'd5/c4/a1'
+  __printf_color 248 'bd/ae/93'
+  __printf_color 246 'a8/99/84'
+
+  __printf_color 167 'fb/49/34'
+  __printf_color 142 'b8/bb/26'
+  __printf_color 214 'fa/bd/2f'
+  __printf_color 109 '83/a5/98'
+  __printf_color 175 'd3/86/9b'
+  __printf_color 108 '8e/c0/7c'
+  __printf_color 208 'fe/80/19'
+
+  __printf_color 88 '9d/00/06'
+  __printf_color 100 '79/74/0e'
+  __printf_color 136 'b5/76/14'
+  __printf_color 24 '07/66/78'
+  __printf_color 96 '8f/3f/71'
+  __printf_color 66 '42/7b/58'
+  __printf_color 130 'af/3a/03'
+end
+
+function __printf_color
+  command printf "\033]4;$argv[1];rgb:$argv[2]\007"
+end

cli/dot-config/helix/config.toml

@@ -1,136 +1,15 @@
 # Test
 theme = "jonas"
 
-[keys.normal]
+[editor.file-picker]
-# Quick iteration on config changes
+hidden = false
-C-o = "jump_backward"
-
-# Some nice Helix stuff
-C-h = "select_prev_sibling"
-C-j = "shrink_selection"
-C-k = "expand_selection"
-C-l = "select_next_sibling"
-
-# Personal preference
-o = ["open_below", "normal_mode"]
-O = ["open_above", "normal_mode"]
-s = ["select_all", "select_regex"]
-
-# Muscle memory
-"{" = ["goto_prev_paragraph", "collapse_selection"]
-"}" = ["goto_next_paragraph", "collapse_selection"]
-
-0 = "goto_line_start"
-"$" = "goto_line_end"
-
-"^" = "goto_first_nonwhitespace"
-G = "goto_file_end"
-V = ["select_mode", "extend_to_line_bounds"]
-D = ["extend_to_line_end", "yank_main_selection_to_clipboard", "delete_selection"]
-S = "surround_add" # Would be nice to be able to do something after this but it isn't chainable
-
-# Clipboards over registers
-x = "delete_selection"
-p = ["paste_clipboard_after", "collapse_selection"]
-P = ["paste_clipboard_before", "collapse_selection"]
-Y = ["extend_to_line_end", "yank_main_selection_to_clipboard", "collapse_selection"]
-
-# There is no real difference if you have overridden the commands bound to 'w', 'e' and 'b' like above
-# But if you really want to get familiar with the Helix way of selecting-while-moving, comment the
-# bindings for 'w', 'e', and 'b' out and leave the bindings for 'i' and 'a' active below. A world of difference!
-i = ["insert_mode", "collapse_selection"]
-a = ["append_mode", "collapse_selection"]
-
-# Undoing the 'd' + motion commands restores the selection which is annoying
-u = ["undo", "collapse_selection"]
-
-# Escape the madness! No more fighting with the cursor! Or with multiple cursors!
-esc = ["collapse_selection", "keep_primary_selection"]
-
-
-# Search for word under cursor
-"*" = ["move_char_right", "move_prev_word_start", "move_next_word_end", "search_selection", "search_next"]
-"#" = ["move_char_right", "move_prev_word_start", "move_next_word_end", "search_selection", "search_prev"]
-
-# Make j and k behave as they do Vim when soft-wrap is enabled
-j = "move_line_down"
-k = "move_line_up"
-
-# Extend and select commands that expect a manual input can't be chained
-# I've kept d[X] commands here because it's better to at least have the stuff you want to delete
-# selected so that it's just a keystroke away to delete
-[keys.normal.d]
-d = ["extend_to_line_bounds", "yank_main_selection_to_clipboard", "delete_selection"]
-t = ["extend_till_char"]
-s = ["surround_delete"]
-i = ["select_textobject_inner"]
-a = ["select_textobject_around"]
-j = ["select_mode", "extend_to_line_bounds", "extend_line_below", "yank_main_selection_to_clipboard", "delete_selection", "normal_mode"]
-down = ["select_mode", "extend_to_line_bounds", "extend_line_below", "yank_main_selection_to_clipboard", "delete_selection", "normal_mode"]
-k = ["select_mode", "extend_to_line_bounds", "extend_line_above", "yank_main_selection_to_clipboard", "delete_selection", "normal_mode"]
-up = ["select_mode", "extend_to_line_bounds", "extend_line_above", "yank_main_selection_to_clipboard", "delete_selection", "normal_mode"]
-G = ["select_mode", "extend_to_line_bounds", "goto_last_line", "extend_to_line_bounds", "yank_main_selection_to_clipboard", "delete_selection", "normal_mode"]
-w = ["move_next_word_start", "yank_main_selection_to_clipboard", "delete_selection"]
-W = ["move_next_long_word_start", "yank_main_selection_to_clipboard", "delete_selection"]
-g = { g = ["select_mode", "extend_to_line_bounds", "goto_file_start", "extend_to_line_bounds", "yank_main_selection_to_clipboard", "delete_selection", "normal_mode"] }
-
-[keys.normal.y]
-y = ["extend_to_line_bounds", "yank_main_selection_to_clipboard", "normal_mode", "collapse_selection"]
-j = ["select_mode", "extend_to_line_bounds", "extend_line_below", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"]
-down = ["select_mode", "extend_to_line_bounds", "extend_line_below", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"]
-k = ["select_mode", "extend_to_line_bounds", "extend_line_above", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"]
-up = ["select_mode", "extend_to_line_bounds", "extend_line_above", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"]
-G = ["select_mode", "extend_to_line_bounds", "goto_last_line", "extend_to_line_bounds", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"]
-w = ["move_next_word_start", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"]
-W = ["move_next_long_word_start", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"]
-g = { g = ["select_mode", "extend_to_line_bounds", "goto_file_start", "extend_to_line_bounds", "yank_main_selection_to_clipboard", "collapse_selection", "normal_mode"] }
-
-[keys.insert]
-# Escape the madness! No more fighting with the cursor! Or with multiple cursors!
-esc = ["collapse_selection", "normal_mode"]
-
-[keys.normal.space.space]
-o = ":config-open"
-r = ":config-reload"
-s = ":write-all"
 
 [keys.normal.space]
-q = ":q"
+"H" = ":reset-diff-change" # Hard reset the hunk
-F = "file_picker_in_current_buffer_directory"
 
-[keys.select]
+[keys.normal.space.l]
-# Muscle memory
+"a" = ":rla"
-"{" = ["extend_to_line_bounds", "goto_prev_paragraph"]
-"}" = ["extend_to_line_bounds", "goto_next_paragraph"]
-0 = "goto_line_start"
-"$" = "goto_line_end"
-"^" = "goto_first_nonwhitespace"
-G = "goto_file_end"
-D = ["extend_to_line_bounds", "delete_selection", "normal_mode"]
-"%" = "match_brackets"
-S = "surround_add"
-u = ["switch_to_lowercase", "collapse_selection", "normal_mode"]
-U = ["switch_to_uppercase", "collapse_selection", "normal_mode"]
 
-# Visual-mode specific muscle memory
+[keys.normal.space.space.c]
-i = "select_textobject_inner"
+"o" = ":config-open"
-a = "select_textobject_around"
+"r" = ":config-reload"
-
-# Some extra binds to allow us to insert/append in select mode because it's nice with multiple cursors
-tab = ["insert_mode", "collapse_selection"] # tab is read by most terminal editors as "C-i"
-C-a = ["append_mode", "collapse_selection"]
-
-# Make selecting lines in visual mode behave sensibly
-k = ["extend_line_up", "extend_to_line_bounds"]
-j = ["extend_line_down", "extend_to_line_bounds"]
-
-# Clipboards over registers ye ye
-d = ["yank_main_selection_to_clipboard", "delete_selection"]
-x = ["yank_main_selection_to_clipboard", "delete_selection"]
-y = ["yank_main_selection_to_clipboard", "normal_mode", "flip_selections", "collapse_selection"]
-Y = ["extend_to_line_bounds", "yank_main_selection_to_clipboard", "goto_line_start", "collapse_selection", "normal_mode"]
-p = "replace_selections_with_clipboard" # No life without this
-P = "paste_clipboard_before"
-
-# Escape the madness! No more fighting with the cursor! Or with multiple cursors!
-esc = ["collapse_selection", "keep_primary_selection", "normal_mode"]

cli/dot-config/helix/languages.toml

@@ -1,14 +1,41 @@
+# introduce new language server
+[language-server.scls]
+command = "simple-completion-language-server"
+
+[language-server.scls.config]
+feature_words = false                # enable completion by word
+feature_snippets = true              # enable snippets
+snippets_first = true                # completions will return before snippets by default
+snippets_inline_by_word_tail = false # suggest snippets by WORD tail, for example text `xsq|` become `x^2|` when snippet `sq` has body `^2`
+feature_unicode_input = false        # enable "unicode input"
+feature_paths = false                # enable path completion
+feature_citations = false            # enable citation completion (only on `citation` feature enabled)
+
+
+# write logs to /tmp/completion.log
+[language-server.scls.environment]
+RUST_LOG = "info,simple-completion-language-server=info"
+LOG_FILE = "/tmp/completion.log"
+
+# append language server to existed languages
+[[language]]
+name = "rust"
+language-servers = [ "scls", "rust-analyzer" ]
+
+[[language]]
+name = "git-commit"
+language-servers = [ "scls" ]
+
 [[language]]
 name = "python"
+language-servers = [ "ty", "scls" ]
 
-[language.debugger]
+# introduce a new language to enable completion on any doc by forcing set language with :set-language stub
-name = "debugpy"
+[[language]]
-transport = "stdio"
+name = "stub"
-command = "python"
+scope = "text.stub"
-args = ["-m",  "debugpy.adapter"]
+file-types = []
-
+shebangs = []
-[[language.debugger.templates]]
+roots = []
-name = "source"
+auto-format = false
-request = "launch"
+language-servers = [ "scls" ]
-completion = [ { name = "entrypoint", completion = "filename", default = "." } ]
-args = { mode = "debug", program = "{0}" }

cli/dot-config/helix/snippets/python.toml

@@ -0,0 +1,5 @@
+[[snippets]]
+prefix = "ldldldld"
+scope = [ "python" ]  # language id https://code.visualstudio.com/docs/languages/identifiers#_known-language-identifiers
+body = 'log.debug("$1", "$2")'
+description = "log at debug level"

cli/dot-config/helix/themes/jonas.toml

@@ -122,7 +122,7 @@
 
 
 [palette]
-bg0 = "#282828"   # main background
+bg0 = "#000000"   # main background
 bg0_s = "#32302f"
 bg1 = "#3c3836"
 bg2 = "#504945"

cli/dot-config/lazydocker/config.yml

@@ -0,0 +1,63 @@
+gui:
+  scrollHeight: 2
+  language: "auto" # one of 'auto' | 'en' | 'pl' | 'nl' | 'de' | 'tr'
+  border: "rounded" # one of 'rounded' | 'single' | 'double' | 'hidden'
+  theme:
+    activeBorderColor:
+      - green
+      - bold
+    inactiveBorderColor:
+      - white
+    selectedLineBgColor:
+      - blue
+    optionsTextColor:
+      - blue
+  returnImmediately: false
+  wrapMainPanel: true
+  # Side panel width as a ratio of the screen's width
+  sidePanelWidth: 0.333
+  # Determines whether we show the bottom line (the one containing keybinding
+  # info and the status of the app).
+  showBottomLine: true
+  # When true, increases vertical space used by focused side panel,
+  # creating an accordion effect
+  expandFocusedSidePanel: false
+  # Determines which screen mode will be used on startup
+  screenMode: "normal" # one of 'normal' | 'half' | 'fullscreen'
+  # Determines the style of the container status and container health display in the
+  # containers panel. "long": full words (default), "short": one or two characters,
+  # "icon": unicode emoji.
+  containerStatusHealthStyle: "long"
+logs:
+  timestamps: false
+  since: '60m' # set to '' to show all logs
+  tail: '' # set to 200 to show last 200 lines of logs
+commandTemplates:
+  dockerCompose: docker compose # Determines the Docker Compose command to run, referred to as .DockerCompose in commandTemplates
+  restartService: '{{ .DockerCompose }} restart {{ .Service.Name }}'
+  up:  '{{ .DockerCompose }} up -d'
+  down: '{{ .DockerCompose }} down'
+  downWithVolumes: '{{ .DockerCompose }} down --volumes'
+  upService:  '{{ .DockerCompose }} up -d {{ .Service.Name }}'
+  startService: '{{ .DockerCompose }} start {{ .Service.Name }}'
+  stopService: '{{ .DockerCompose }} stop {{ .Service.Name }}'
+  serviceLogs: '{{ .DockerCompose }} logs --since=60m --follow {{ .Service.Name }}'
+  viewServiceLogs: '{{ .DockerCompose }} logs --follow {{ .Service.Name }}'
+  rebuildService: '{{ .DockerCompose }} up -d --build {{ .Service.Name }}'
+  recreateService: '{{ .DockerCompose }} up -d --force-recreate {{ .Service.Name }}'
+  allLogs: '{{ .DockerCompose }} logs --tail=300 --follow'
+  viewAlLogs: '{{ .DockerCompose }} logs'
+  dockerComposeConfig: '{{ .DockerCompose }} config'
+  checkDockerComposeConfig: '{{ .DockerCompose }} config --quiet'
+  serviceTop: '{{ .DockerCompose }} top {{ .Service.Name }}'
+oS:
+  openCommand: open {{filename}}
+  openLinkCommand: open {{link}}
+stats:
+  graphs:
+    - caption: CPU (%)
+      statPath: DerivedStats.CPUPercentage
+      color: blue
+    - caption: Memory (%)
+      statPath: DerivedStats.MemoryPercentage
+      color: green

cli/dot-config/neofetch/config.conf

@@ -0,0 +1,880 @@
+# See this wiki page for more info:
+# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
+print_info() {
+    info title
+    info underline
+
+    info "OS" distro
+    info "Host" model
+    info "Kernel" kernel
+    info "Uptime" uptime
+    info "Packages" packages
+    info "Shell" shell
+    info "Resolution" resolution
+    info "DE" de
+    info "WM" wm
+    info "WM Theme" wm_theme
+    info "Theme" theme
+    info "Icons" icons
+    info "Terminal" term
+    info "Terminal Font" term_font
+    info "CPU" cpu
+    info "GPU" gpu
+    info "Memory" memory
+
+    # info "GPU Driver" gpu_driver  # Linux/macOS only
+    # info "Disk" disk
+    # info "Battery" battery
+    # info "Font" font
+    # info "Song" song
+    # [[ "$player" ]] && prin "Music Player" "$player"
+    # info "Local IP" local_ip
+    # info "Public IP" public_ip
+    # info "Users" users
+    # info "Locale" locale  # This only works on glibc systems.
+
+    info cols
+}
+
+# Title
+
+
+# Hide/Show Fully qualified domain name.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --title_fqdn
+title_fqdn="off"
+
+
+# Kernel
+
+
+# Shorten the output of the kernel function.
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --kernel_shorthand
+# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
+#
+# Example:
+# on:  '4.8.9-1-ARCH'
+# off: 'Linux 4.8.9-1-ARCH'
+kernel_shorthand="on"
+
+
+# Distro
+
+
+# Shorten the output of the distro function
+#
+# Default:  'off'
+# Values:   'on', 'tiny', 'off'
+# Flag:     --distro_shorthand
+# Supports: Everything except Windows and Haiku
+distro_shorthand="off"
+
+# Show/Hide OS Architecture.
+# Show 'x86_64', 'x86' and etc in 'Distro:' output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --os_arch
+#
+# Example:
+# on:  'Arch Linux x86_64'
+# off: 'Arch Linux'
+os_arch="on"
+
+
+# Uptime
+
+
+# Shorten the output of the uptime function
+#
+# Default: 'on'
+# Values:  'on', 'tiny', 'off'
+# Flag:    --uptime_shorthand
+#
+# Example:
+# on:   '2 days, 10 hours, 3 mins'
+# tiny: '2d 10h 3m'
+# off:  '2 days, 10 hours, 3 minutes'
+uptime_shorthand="on"
+
+
+# Memory
+
+
+# Show memory percentage in output.
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --memory_percent
+#
+# Example:
+# on:   '1801MiB / 7881MiB (22%)'
+# off:  '1801MiB / 7881MiB'
+memory_percent="off"
+
+# Change memory output unit.
+#
+# Default: 'mib'
+# Values:  'kib', 'mib', 'gib'
+# Flag:    --memory_unit
+#
+# Example:
+# kib  '1020928KiB / 7117824KiB'
+# mib  '1042MiB / 6951MiB'
+# gib: ' 0.98GiB / 6.79GiB'
+memory_unit="mib"
+
+
+# Packages
+
+
+# Show/Hide Package Manager names.
+#
+# Default: 'tiny'
+# Values:  'on', 'tiny' 'off'
+# Flag:    --package_managers
+#
+# Example:
+# on:   '998 (pacman), 8 (flatpak), 4 (snap)'
+# tiny: '908 (pacman, flatpak, snap)'
+# off:  '908'
+package_managers="on"
+
+
+# Shell
+
+
+# Show the path to $SHELL
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --shell_path
+#
+# Example:
+# on:  '/bin/bash'
+# off: 'bash'
+shell_path="off"
+
+# Show $SHELL version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --shell_version
+#
+# Example:
+# on:  'bash 4.4.5'
+# off: 'bash'
+shell_version="on"
+
+
+# CPU
+
+
+# CPU speed type
+#
+# Default: 'bios_limit'
+# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
+# Flag:    --speed_type
+# Supports: Linux with 'cpufreq'
+# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
+speed_type="bios_limit"
+
+# CPU speed shorthand
+#
+# Default: 'off'
+# Values: 'on', 'off'.
+# Flag:    --speed_shorthand
+# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
+#
+# Example:
+# on:    'i7-6500U (4) @ 3.1GHz'
+# off:   'i7-6500U (4) @ 3.100GHz'
+speed_shorthand="off"
+
+# Enable/Disable CPU brand in output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_brand
+#
+# Example:
+# on:   'Intel i7-6500U'
+# off:  'i7-6500U (4)'
+cpu_brand="on"
+
+# CPU Speed
+# Hide/Show CPU speed.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_speed
+#
+# Example:
+# on:  'Intel i7-6500U (4) @ 3.1GHz'
+# off: 'Intel i7-6500U (4)'
+cpu_speed="on"
+
+# CPU Cores
+# Display CPU cores in output
+#
+# Default: 'logical'
+# Values:  'logical', 'physical', 'off'
+# Flag:    --cpu_cores
+# Support: 'physical' doesn't work on BSD.
+#
+# Example:
+# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
+# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
+# off:      'Intel i7-6500U @ 3.1GHz'
+cpu_cores="logical"
+
+# CPU Temperature
+# Hide/Show CPU temperature.
+# Note the temperature is added to the regular CPU function.
+#
+# Default: 'off'
+# Values:  'C', 'F', 'off'
+# Flag:    --cpu_temp
+# Supports: Linux, BSD
+# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
+#       coretemp kernel module. This only supports newer Intel processors.
+#
+# Example:
+# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
+# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
+# off: 'Intel i7-6500U (4) @ 3.1GHz'
+cpu_temp="off"
+
+
+# GPU
+
+
+# Enable/Disable GPU Brand
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gpu_brand
+#
+# Example:
+# on:  'AMD HD 7950'
+# off: 'HD 7950'
+gpu_brand="on"
+
+# Which GPU to display
+#
+# Default: 'all'
+# Values:  'all', 'dedicated', 'integrated'
+# Flag:    --gpu_type
+# Supports: Linux
+#
+# Example:
+# all:
+#   GPU1: AMD HD 7950
+#   GPU2: Intel Integrated Graphics
+#
+# dedicated:
+#   GPU1: AMD HD 7950
+#
+# integrated:
+#   GPU1: Intel Integrated Graphics
+gpu_type="all"
+
+
+# Resolution
+
+
+# Display refresh rate next to each monitor
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --refresh_rate
+# Supports: Doesn't work on Windows.
+#
+# Example:
+# on:  '1920x1080 @ 60Hz'
+# off: '1920x1080'
+refresh_rate="off"
+
+
+# Gtk Theme / Icons / Font
+
+
+# Shorten output of GTK Theme / Icons / Font
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --gtk_shorthand
+#
+# Example:
+# on:  'Numix, Adwaita'
+# off: 'Numix [GTK2], Adwaita [GTK3]'
+gtk_shorthand="off"
+
+
+# Enable/Disable gtk2 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk2
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Adwaita [GTK3]'
+gtk2="on"
+
+# Enable/Disable gtk3 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk3
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Numix [GTK2]'
+gtk3="on"
+
+
+# IP Address
+
+
+# Website to ping for the public IP
+#
+# Default: 'http://ident.me'
+# Values:  'url'
+# Flag:    --ip_host
+public_ip_host="http://ident.me"
+
+# Public IP timeout.
+#
+# Default: '2'
+# Values:  'int'
+# Flag:    --ip_timeout
+public_ip_timeout=2
+
+# Local IP interface
+#
+# Default: 'auto' (interface of default route)
+# Values:  'auto', 'en0', 'en1'
+# Flag:    --ip_interface
+local_ip_interface=('auto')
+
+
+# Desktop Environment
+
+
+# Show Desktop Environment version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --de_version
+de_version="on"
+
+
+# Disk
+
+
+# Which disks to display.
+# The values can be any /dev/sdXX, mount point or directory.
+# NOTE: By default we only show the disk info for '/'.
+#
+# Default: '/'
+# Values:  '/', '/dev/sdXX', '/path/to/drive'.
+# Flag:    --disk_show
+#
+# Example:
+# disk_show=('/' '/dev/sdb1'):
+#      'Disk (/): 74G / 118G (66%)'
+#      'Disk (/mnt/Videos): 823G / 893G (93%)'
+#
+# disk_show=('/'):
+#      'Disk (/): 74G / 118G (66%)'
+#
+disk_show=('/')
+
+# Disk subtitle.
+# What to append to the Disk subtitle.
+#
+# Default: 'mount'
+# Values:  'mount', 'name', 'dir', 'none'
+# Flag:    --disk_subtitle
+#
+# Example:
+# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
+#         'Disk (/dev/sdb2): 74G / 118G (66%)'
+#
+# mount:  'Disk (/): 74G / 118G (66%)'
+#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
+#         'Disk (/mnt/Videos): 74G / 118G (66%)'
+#
+# dir:    'Disk (/): 74G / 118G (66%)'
+#         'Disk (Local Disk): 74G / 118G (66%)'
+#         'Disk (Videos): 74G / 118G (66%)'
+#
+# none:   'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+disk_subtitle="mount"
+
+# Disk percent.
+# Show/Hide disk percent.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --disk_percent
+#
+# Example:
+# on:  'Disk (/): 74G / 118G (66%)'
+# off: 'Disk (/): 74G / 118G'
+disk_percent="on"
+
+
+# Song
+
+
+# Manually specify a music player.
+#
+# Default: 'auto'
+# Values:  'auto', 'player-name'
+# Flag:    --music_player
+#
+# Available values for 'player-name':
+#
+# amarok
+# audacious
+# banshee
+# bluemindo
+# clementine
+# cmus
+# deadbeef
+# deepin-music
+# dragon
+# elisa
+# exaile
+# gnome-music
+# gmusicbrowser
+# gogglesmm
+# guayadeque
+# io.elementary.music
+# iTunes
+# Music
+# juk
+# lollypop
+# MellowPlayer
+# mocp
+# mopidy
+# mpd
+# muine
+# netease-cloud-music
+# olivia
+# playerctl
+# pogo
+# pragha
+# qmmp
+# quodlibet
+# rhythmbox
+# sayonara
+# smplayer
+# spotify
+# strawberry
+# tauonmb
+# tomahawk
+# vlc
+# xmms2d
+# xnoise
+# yarock
+music_player="auto"
+
+# Format to display song information.
+#
+# Default: '%artist% - %album% - %title%'
+# Values:  '%artist%', '%album%', '%title%'
+# Flag:    --song_format
+#
+# Example:
+# default: 'Song: Jet - Get Born - Sgt Major'
+song_format="%artist% - %album% - %title%"
+
+# Print the Artist, Album and Title on separate lines
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --song_shorthand
+#
+# Example:
+# on:  'Artist: The Fratellis'
+#      'Album: Costello Music'
+#      'Song: Chelsea Dagger'
+#
+# off: 'Song: The Fratellis - Costello Music - Chelsea Dagger'
+song_shorthand="off"
+
+# 'mpc' arguments (specify a host, password etc).
+#
+# Default:  ''
+# Example: mpc_args=(-h HOST -P PASSWORD)
+mpc_args=()
+
+
+# Text Colors
+
+
+# Text Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --colors
+#
+# Each number represents a different part of the text in
+# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
+#
+# Example:
+# colors=(distro)      - Text is colored based on Distro colors.
+# colors=(4 6 1 8 8 6) - Text is colored in the order above.
+colors=(distro)
+
+
+# Text Options
+
+
+# Toggle bold text
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bold
+bold="on"
+
+# Enable/Disable Underline
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --underline
+underline_enabled="on"
+
+# Underline character
+#
+# Default:  '-'
+# Values:   'string'
+# Flag:     --underline_char
+underline_char="-"
+
+
+# Info Separator
+# Replace the default separator with the specified string.
+#
+# Default:  ':'
+# Flag:     --separator
+#
+# Example:
+# separator="->":   'Shell-> bash'
+# separator=" =":   'WM = dwm'
+separator=":"
+
+
+# Color Blocks
+
+
+# Color block range
+# The range of colors to print.
+#
+# Default:  '0', '15'
+# Values:   'num'
+# Flag:     --block_range
+#
+# Example:
+#
+# Display colors 0-7 in the blocks.  (8 colors)
+# neofetch --block_range 0 7
+#
+# Display colors 0-15 in the blocks. (16 colors)
+# neofetch --block_range 0 15
+block_range=(0 15)
+
+# Toggle color blocks
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --color_blocks
+color_blocks="on"
+
+# Color block width in spaces
+#
+# Default:  '3'
+# Values:   'num'
+# Flag:     --block_width
+block_width=3
+
+# Color block height in lines
+#
+# Default:  '1'
+# Values:   'num'
+# Flag:     --block_height
+block_height=1
+
+# Color Alignment
+#
+# Default: 'auto'
+# Values: 'auto', 'num'
+# Flag: --col_offset
+#
+# Number specifies how far from the left side of the terminal (in spaces) to
+# begin printing the columns, in case you want to e.g. center them under your
+# text.
+# Example:
+# col_offset="auto" - Default behavior of neofetch
+# col_offset=7      - Leave 7 spaces then print the colors
+col_offset="auto"
+
+# Progress Bars
+
+
+# Bar characters
+#
+# Default:  '-', '='
+# Values:   'string', 'string'
+# Flag:     --bar_char
+#
+# Example:
+# neofetch --bar_char 'elapsed' 'total'
+# neofetch --bar_char '-' '='
+bar_char_elapsed="-"
+bar_char_total="="
+
+# Toggle Bar border
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bar_border
+bar_border="on"
+
+# Progress bar length in spaces
+# Number of chars long to make the progress bars.
+#
+# Default:  '15'
+# Values:   'num'
+# Flag:     --bar_length
+bar_length=15
+
+# Progress bar colors
+# When set to distro, uses your distro's logo colors.
+#
+# Default:  'distro', 'distro'
+# Values:   'distro', 'num'
+# Flag:     --bar_colors
+#
+# Example:
+# neofetch --bar_colors 3 4
+# neofetch --bar_colors distro 5
+bar_color_elapsed="distro"
+bar_color_total="distro"
+
+
+# Info display
+# Display a bar with the info.
+#
+# Default: 'off'
+# Values:  'bar', 'infobar', 'barinfo', 'off'
+# Flags:   --memory_display
+#          --battery_display
+#          --disk_display
+#
+# Example:
+# bar:     '[---=======]'
+# infobar: 'info [---=======]'
+# barinfo: '[---=======] info'
+# off:     'info'
+memory_display="off"
+battery_display="off"
+disk_display="off"
+
+
+# Backend Settings
+
+
+# Image backend.
+#
+# Default:  'ascii'
+# Values:   'ascii', 'caca', 'catimg', 'chafa', 'jp2a', 'iterm2', 'off',
+#           'pot', 'termpix', 'pixterm', 'tycat', 'w3m', 'kitty', 'ueberzug',
+#           'viu'
+
+# Flag:     --backend
+image_backend="ascii"
+
+# Image Source
+#
+# Which image or ascii file to display.
+#
+# Default:  'auto'
+# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
+#           'command output (neofetch --ascii "$(fortune | cowsay -W 30)")'
+# Flag:     --source
+#
+# NOTE: 'auto' will pick the best image source for whatever image backend is used.
+#       In ascii mode, distro ascii art will be used and in an image mode, your
+#       wallpaper will be used.
+image_source="auto"
+
+
+# Ascii Options
+
+
+# Ascii distro
+# Which distro's ascii art to display.
+#
+# Default: 'auto'
+# Values:  'auto', 'distro_name'
+# Flag:    --ascii_distro
+# NOTE: AIX, Hash, Alpine, AlterLinux, Amazon, Anarchy, Android, instantOS,
+#       Antergos, antiX, "AOSC OS", "AOSC OS/Retro", Apricity, ArchCraft,
+#       ArcoLinux, ArchBox, ARCHlabs, ArchStrike, XFerience, ArchMerge, Arch,
+#       Artix, Arya, Bedrock, Bitrig, BlackArch, BLAG, BlankOn, BlueLight,
+#       Bodhi, bonsai, BSD, BunsenLabs, Calculate, Carbs, CentOS, Chakra, ChaletOS,
+#       Chapeau, Chrom*, Cleanjaro, ClearOS, Clear_Linux, Clover, Condres,
+#       Container_Linux, Crystal Linux, CRUX, Cucumber, dahlia, Debian, Deepin,
+#       DesaOS, Devuan, DracOS, DarkOs, Itc, DragonFly, Drauger, Elementary,
+#       EndeavourOS, Endless, EuroLinux, Exherbo, Fedora, Feren, FreeBSD,
+#       FreeMiNT, Frugalware, Funtoo, GalliumOS, Garuda, Gentoo, Pentoo,
+#       gNewSense, GNOME, GNU, GoboLinux, Grombyang, Guix, Haiku, Huayra, HydroOS
+#       Hyperbola, iglunix, janus, Kali, KaOS, KDE_neon, Kibojoe, Kogaion, Korora,
+#       KSLinux, Kubuntu, LEDE, LaxerOS, LibreELEC, LFS, Linux_Lite, LMDE,
+#       Lubuntu, Lunar, macos, Mageia, MagpieOS, Mandriva, Manjaro, TeArch, Maui,
+#       Mer, Minix, LinuxMint, Live_Raizo, MX_Linux, Namib, Neptune, NetBSD,
+#       Netrunner, Nitrux, NixOS, Nurunner, NuTyX, OBRevenge, OpenBSD,
+#       openEuler, OpenIndiana, openmamba, OpenMandriva, OpenStage, OpenWrt,
+#       osmc, Oracle, OS Elbrus, PacBSD, Parabola, Pardus, Parrot, Parsix,
+#       TrueOS, PCLinuxOS, Pengwin, Peppermint, Pisi, popos, Porteus, PostMarketOS,
+#       Proxmox, PuffOS, Puppy, PureOS, Qubes, Qubyt, Quibian, Radix, Raspbian,
+#       Reborn_OS, Redstar, Redcore, Redhat, Refracted_Devuan, Regata, Regolith,
+#       Rocky, Rosa, sabotage, Sabayon, Sailfish, SalentOS, Scientific, Septor,
+#       SereneLinux, SharkLinux, Siduction, SkiffOS, Slackware, SliTaz, SmartOS,
+#       Solus, Source_Mage, Sparky, Star, SteamOS, SunOS, openSUSE_Leap, t2,
+#       openSUSE_Tumbleweed, openSUSE, SwagArch, Tails, Trisquel,
+#       Ubuntu-Cinnamon, Ubuntu-Budgie, Ubuntu-GNOME, Ubuntu-MATE,
+#       Ubuntu-Studio, Ubuntu, Univention, Venom, Void, VNux, LangitKetujuh, semc,
+#       Obarun, windows10, Windows7, Xubuntu, Zorin, and IRIX have ascii logos.
+# NOTE: Arch, Ubuntu, Redhat, Fedora and Dragonfly have 'old' logo variants.
+#       Use '{distro name}_old' to use the old logos.
+# NOTE: Ubuntu has flavor variants.
+#       Change this to Lubuntu, Kubuntu, Xubuntu, Ubuntu-GNOME,
+#       Ubuntu-Studio, Ubuntu-Mate  or Ubuntu-Budgie to use the flavors.
+# NOTE: Arcolinux, Dragonfly, Fedora, Alpine, Arch, Ubuntu,
+#       CRUX, Debian, Gentoo, FreeBSD, Mac, NixOS, OpenBSD, android,
+#       Artix, CentOS, Cleanjaro, ElementaryOS, GUIX, Hyperbola,
+#       Manjaro, MXLinux, NetBSD, Parabola, POP_OS, PureOS,
+#       Slackware, SunOS, LinuxLite, OpenSUSE, Raspbian,
+#       postmarketOS, and Void have a smaller logo variant.
+#       Use '{distro name}_small' to use the small variants.
+ascii_distro="auto"
+
+# Ascii Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --ascii_colors
+#
+# Example:
+# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
+# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
+ascii_colors=(distro)
+
+# Bold ascii logo
+# Whether or not to bold the ascii logo.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --ascii_bold
+ascii_bold="on"
+
+
+# Image Options
+
+
+# Image loop
+# Setting this to on will make neofetch redraw the image constantly until
+# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --loop
+image_loop="off"
+
+# Thumbnail directory
+#
+# Default: '~/.cache/thumbnails/neofetch'
+# Values:  'dir'
+thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
+
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
+# Crop offset
+# Note: Only affects 'normal' crop mode.
+#
+# Default:  'center'
+# Values:   'northwest', 'north', 'northeast', 'west', 'center'
+#           'east', 'southwest', 'south', 'southeast'
+# Flag:     --crop_offset
+crop_offset="center"
+
+# Image size
+# The image is half the terminal width by default.
+#
+# Default: 'auto'
+# Values:  'auto', '00px', '00%', 'none'
+# Flags:   --image_size
+#          --size
+image_size="auto"
+
+# Catimg block size.
+# Control the resolution of catimg.
+#
+# Default: '2'
+# Values:  '1', '2'
+# Flags:   --catimg_size
+catimg_size="2"
+
+# Gap between image and text
+#
+# Default: '3'
+# Values:  'num', '-num'
+# Flag:    --gap
+gap=3
+
+# Image offsets
+# Only works with the w3m backend.
+#
+# Default: '0'
+# Values:  'px'
+# Flags:   --xoffset
+#          --yoffset
+yoffset=0
+xoffset=0
+
+# Image background color
+# Only works with the w3m backend.
+#
+# Default: ''
+# Values:  'color', 'blue'
+# Flag:    --bg_color
+background_color=
+
+
+# Misc Options
+
+# Stdout mode
+# Turn off all colors and disables image backend (ASCII/Image).
+# Useful for piping into another command.
+# Default: 'off'
+# Values: 'on', 'off'
+stdout="off"

cli/dot-config/neomutt/mailcap

@@ -0,0 +1,5 @@
+text/html; firefox %s
+text/plain; nvim %s
+application/pdf; zathura --fork %s
+image/png; feh %s
+image/jpeg; feh %s

cli/dot-config/neomutt/neomuttrc

@@ -0,0 +1,98 @@
+source ~/vault/mutt_keys
+set folder=~/mail
+source ~/.mutt-mailboxes
+
+set sidebar_visible
+set header_cache = "~/.cache/mutt"
+set message_cachedir = "~/.cache/mutt-mess"
+set mailcap_path = "~/.config/neomutt/mailcap"
+set record="~/mail/sent-mail"
+set postponed="~/mail/drafts"
+set mbox_type                      = Maildir
+
+
+# Color definitions
+set my_bg           = "color236"
+set my_fg           = "color252"
+set my_red          = "color210"
+set my_green        = "color114"
+set my_blue         = "color68"
+set my_aqua         = "color80"
+set my_yellow       = "color221"
+set my_orange       = "color209"
+set my_purple       = "color176"
+set my_comment      = "color246"
+set my_selection    = "color239"
+set my_current_line = "color237"
+
+# basic components
+color hdrdefault $my_green $my_bg
+color signature  $my_blue $my_bg
+color attachment $my_yellow $my_bg
+color prompt     $my_purple $my_bg
+color message    $my_green $my_bg
+color error      $my_red $my_bg
+color indicator  $my_fg $my_selection
+color status     $my_bg $my_orange
+color tree       $my_blue $my_bg
+color normal     $my_fg $my_bg
+color markers    $my_red $my_bg
+color search     $my_bg $my_yellow
+color tilde      $my_purple $my_bg
+color underline  $my_bg $my_yellow
+color index      $my_green $my_bg ~F
+color index      $my_blue $my_bg "~N|~O"
+
+### Highlights inside the body of a message ###
+
+# URLs
+color body $my_aqua $my_bg "(https?|s?ftp|news|telnet|finger|ssh)://[^ \"\t\r\n]*"
+color body $my_aqua $my_bg "mailto:[-a-z_0-9.]+@[-a-z_0-9.]+"
+mono body bold "(https?|s?ftp|news|telnet|finger|ssh)://[^ \"\t\r\n]*"
+mono body bold "mailto:[-a-z_0-9.]+@[-a-z_0-9.]+"
+
+# email addresses
+color body $my_blue $my_bg "[-a-z_0-9.%$]+@[-a-z_0-9.]+\\.[-a-z][-a-z]+"
+#mono body bold "[-a-z_0-9.%$]+@[-a-z_0-9.]+\\.[-a-z][-a-z]+"
+
+### Header components ###
+
+color header $my_green  $my_bg "^from:"
+color header $my_green  $my_bg "^to:"
+color header $my_green  $my_bg "^cc:"
+color header $my_green  $my_bg "^date:"
+color header $my_yellow $my_bg "^newsgroups:"
+color header $my_yellow $my_bg "^reply-to:"
+color header $my_aqua   $my_bg "^subject:"
+color header $my_red    $my_bg "^x-spam-rule:"
+color header $my_green  $my_bg "^x-mailer:"
+color header $my_yellow $my_bg "^message-id:"
+color header $my_yellow $my_bg "^Organization:"
+color header $my_yellow $my_bg "^Organisation:"
+color header $my_yellow $my_bg "^User-Agent:"
+color header $my_yellow $my_bg "^message-id: .*pine"
+color header $my_yellow $my_bg "^X-Fnord:"
+color header $my_yellow $my_bg "^X-WebTV-Stationery:"
+color header $my_yellow $my_bg "^X-Message-Flag:"
+color header $my_yellow $my_bg "^X-Spam-Status:"
+color header $my_yellow $my_bg "^X-SpamProbe:"
+color header $my_red    $my_bg "^X-SpamProbe: SPAM"
+
+### Coloring quoted text - coloring the first 7 levels ###
+
+color quoted  $my_aqua   $my_bg
+color quoted1 $my_yellow $my_bg
+color quoted2 $my_red    $my_bg
+color quoted3 $my_green  $my_bg
+color quoted4 $my_aqua   $my_bg
+color quoted5 $my_yellow $my_bg
+color quoted6 $my_red    $my_bg
+color quoted7 $my_green  $my_bg
+
+### sidebar colors ###
+
+color sidebar_divider   $my_comment $my_bg
+color sidebar_flagged   $my_aqua $my_bg
+color sidebar_highlight $my_bg $my_yellow
+color sidebar_new       $my_green $my_bg
+color sidebar_spoolfile $my_blue $my_bg

cli/dot-config/starship.toml

@@ -0,0 +1,15 @@
+add_newline = false
+
+[aws]
+disabled = true
+
+[gcloud]
+disabled = true
+
+[line_break]
+disabled = true
+
+[sudo]
+disabled = false
+style = "bold red"
+symbol = "SUDO "

cli/dot-config/weechat/sec.conf

@@ -1,20 +0,0 @@
-#
-# weechat -- sec.conf
-#
-# WARNING: It is NOT recommended to edit this file by hand,
-# especially if WeeChat is running.
-#
-# Use commands like /set or /fset to change settings in WeeChat.
-#
-# For more info, see: https://weechat.org/doc/weechat/quickstart/
-#
-
-[crypt]
-cipher = aes256
-hash_algo = sha256
-passphrase_command = ""
-salt = on
-
-[data]
-__passphrase__ = on
-libera_password = "B0880AFBE996D9870D77AFB8160D7949A56A4903CDAFF670A8ED66232CCE98D5561BC45D60F7DBF9E974E63E5A9486234C3E32632366BDD1A81B"

cli/dot-config/zellij/config.kdl

@@ -163,7 +163,7 @@ keybinds clear-defaults=true {
         bind "Alt k" { MoveFocus "up"; }
         bind "Alt l" { MoveFocusOrTab "right"; }
         bind "Alt n" { NewPane; }
-        bind "Alt o" { MoveTab "right"; }
+        bind "Alt Shift n" { NewTab; }
         bind "Alt p" { TogglePaneInGroup; }
         bind "Alt Shift p" { ToggleGroupMarking; }
     }
@@ -288,7 +288,7 @@ default_mode "locked"
 // The name of the default layout to load on startup
 // Default: "default"
 // 
-// default_layout "compact"
+default_layout "compact"
  
 // The folder in which Zellij will look for layouts
 // (Requires restart)
@@ -307,7 +307,7 @@ default_mode "locked"
 //   - true (default)
 //   - false
 // 
-// mouse_mode false
+mouse_mode false
  
 // Toggle having pane frames around the panes
 // Options:
@@ -377,7 +377,7 @@ copy_command "wl-copy"                    // wayland
 // otherwise this will error if such a session exists.
 // Default: <RANDOM>
 // 
-session_name "JonasWork"
+session_name "MainSess"
  
 // When `session_name` is provided, attaches to that session
 // if it is already running or creates it otherwise.

gui/dot-config/alacritty.toml

@@ -1,5 +1,5 @@
 [window]
-opacity = 0.8
+#opacity = 0.8
 
 [font]
 normal = { family = "monospace", style = "Medium" }

gui/dot-config/hypr/hyprland.conf

@@ -33,7 +33,8 @@ exec-once = wl-clip-persist --clipboard regular
 exec-once = nm-applet
 exec-once = ~/projects/scripts/shell/start_kmonad.sh
 exec-once = sleep 5 && nextcloud
-exec-once = sleep 5 && owncloud
+# To save battery
+#exec-once = sleep 5 && owncloud
 
 # Prevent speaker damage
 exec-once = sleep 5 && wpctl set-volume @DEFAULT_AUDIO_SINK@ 42%
@@ -155,6 +156,10 @@ bind = $mainMod SHIFT, D, movetoworkspace, 13
 bind = $mainMod SHIFT, G, movetoworkspace, 14
 bind = $mainMod, F12, exec, ~/projects/scripts/unison_sync.sh
 
+# Useful rotation for thinkpad
+bind = $mainMod SHIFT, F7, exec, hyprctl keyword monitor eDP-1,preferred,auto,1,transform,2
+bind = $mainMod, F7, exec, hyprctl keyword monitor eDP-1,preferred,auto,1,transform,0
+
 # Resizeing with mouse buttons while pressed mod
 bindm = $mainMod, mouse:272, movewindow
 bindm = $mainMod, mouse:273, resizewindow

gui/dot-config/hypr/hyprlock.conf

@@ -0,0 +1,45 @@
+input-field {
+    size = 280, 55
+    outline_thickness = 2
+    dots_size = 0.2
+    dots_spacing = 0.2
+    dots_center = true
+    outer_color = rgba(10, 0, 0, 0)
+    inner_color = rgba(255, 255, 255, 0.1)
+    font_color = rgb(200, 200, 200)
+    fade_on_empty = false
+    font_family = SF Pro Display Bold
+    placeholder_text = <i><span foreground="##ffffff99">Enter Pass</span></i>
+    hide_input = false
+    position = 0, -210
+    halign = center
+    valign = center
+}
+# Date display
+label {
+    monitor =
+    text = cmd[update:1000] echo -e "$(LC_TIME=en_US.UTF-8 date +"%A, %B %d")"
+    color = rgba(216, 222, 233, 0.90)
+    font_size = 25
+    font_family = SF Pro Display Semibold
+    position = 0, 350
+    halign = center
+    valign = center
+}
+
+# Time display
+label {
+    monitor =
+    text = cmd[update:1000] echo "<span>$(date +"%I:%M")</span>"
+    color = rgba(216, 222, 233, 0.90)
+    font_size = 120
+    font_family = SF Pro Display Bold
+    position = 0, 230
+    halign = center
+    valign = center
+}
+
+# Set to just black background as wanted
+background {
+    contrast = 0.5
+}

gui/dot-config/kitty/kitty.conf

@@ -2,7 +2,7 @@ include ./theme.conf
 
 font_size 11.5
 enable_audio_bell yes
-background_opacity 0.80
+#background_opacity 0.80
 default_pointer_shape arrow
 mouse_hide_wait 1
 

home/.bashrc

@@ -1,11 +0,0 @@
-source $HOME/.common_shell
-
-if [ -f /etc/NIXOS ]; then
-    eval "$(starship init bash)"
-else
-	PS1='\u@\h:\w\$ '
-fi
-
-
-# Added by GitLab Knowledge Graph installer
-export PATH="$HOME/.local/bin:$PATH"

home/dot-bashrc

@@ -0,0 +1,19 @@
+source $HOME/.common_shell
+
+if [ -f /etc/NIXOS ]; then
+  eval "$(starship init bash)"
+  eval "$(zoxide init bash)"
+else
+	PS1='\u@\h:\w\$ '
+fi
+
+function r() {
+	local tmp="$(mktemp -t "yazi-cwd.XXXXXX")" cwd
+	yazi "$@" --cwd-file="$tmp"
+	IFS= read -r -d '' cwd < "$tmp"
+	[ -n "$cwd" ] && [ "$cwd" != "$PWD" ] && builtin cd -- "$cwd"
+	rm -f -- "$tmp"
+}
+
+# Added by GitLab Knowledge Graph installer
+export PATH="$HOME/.local/bin:$PATH"

home/dot-common_shell

@@ -5,8 +5,9 @@
 export EDITOR='hx'
 export HTTP_HOME="duckduckgo.com"
 export RANGER_LOAD_DEFAULT_RC=false
-export PATH=$HOME/programs_local/:$HOME/.cargo/bin:~/projects/scripts:$HOME/.local/bin:/usr/local/bin:$PATH
+export PATH=$HOME/programs_local/:$HOME/.cargo/bin:~/projects/scripts:/usr/local/bin:$PATH
-export PATH=$HOME/programs_local/:~/projects/scripts:$PATH
+export PATH=$HOME/programs_local/:~/projects/scripts:~/projects/scripts/other:$PATH
+export TERM="xterm"
 export MANPAGER="nvim +Man!"
 export GOPATH=$HOME/.go
 export PATH=$HOME/.go/bin:$PATH
@@ -15,11 +16,22 @@ export NAP_CONFIG="~/.config/nap/config.yaml"
 
 export loc="$HOME/files_local/"
 
+# Currently not working
+alias gita="GIT_PAGER=cat git cat-file --batch-all-objects --batch-check \
+| awk '$2==\"blob\"{print $1}' \
+| xargs -n1 -I{} sh -c '
+  echo; echo \"==================== {} ====================\";
+  git cat-file -p {} > /tmp/blob.bin;
+  case "$(file -b /tmp/blob.bin)" in
+    *text*) sed -n \"1,200p\" /tmp/blob.bin ;;
+    *) strings /tmp/blob.bin | sed -n \"1,200p\" ;;
+  esac
+'"
+
 alias oati="~/projects/scripts/oathi.sh"
 alias imu="immich upload -r ."
 alias chch="~/projects/scripts/check_git.sh"
 alias rp="rsync --info=progress2 -a --checksum"
-
 alias aut="~/projects/scripts/autostart-server.sh"
 alias tt="~/projects/scripts/find_gits.sh"
 alias on="nvim ~/projects/planner/quick.md"
@@ -28,6 +40,8 @@ alias um="umount /mnt/webdav"
 alias mm="systemctl start mnt-webdav.mount"
 alias wi="wiki-tui"
 alias a="alpine"
+alias h="hx"
+alias l="lazygit"
 alias ff="~/projects/scripts/hyprfix.sh" # Fix the touchpad not working on the laptop with a simple script
 alias sp="spotify_player"
 alias ne="newsboat"
@@ -43,7 +57,7 @@ alias lg="lazygit"
 alias m="make"
 alias mn="make nix"
 alias syn="~/projects/scripts/run_unison.sh"
-alias s="sync"
+alias s="sync && source ~/.zshrc"
 alias rmt="rm /tmp/all_git_projects"
 alias fu="chch && fla && shd"
 alias fla="sudo nixos-rebuild switch --flake ~/nixos#"

home/dot-gitconfig

@@ -4,6 +4,7 @@
 	lg = "log --oneline --graph --decorate"
 	st = "status"
 	up = "!f() { git add .; git commit -a -m 'auto commit'; git fetch -a && git pull && git push; }; f"
+	up = "!f() { git add .; git commit -a -m 'auto commit'; git fetch -a && git pull && git push; }; f"
 
 [branch]
 	autoSetupMerge = true
@@ -22,6 +23,9 @@
 	email = "jonashahn1@gmx.net"
 	name = "Jonas Hahn"
 
+[diff]
+    tool = "vimdiff"
+
 [core]
 	autocrlf = input
 
@@ -30,3 +34,17 @@
 	smudge = git-lfs smudge -- %f
 	process = git-lfs filter-process
 	required = true
+
+[advice]
+	mergeConflict = false
+
+[sendemail]
+	smtpserver = mail.gmx.net
+	smtpuser = jonashahn1@gmx.net
+	smtpencryption = ssl
+	smtpserverport = 465
+	confirm = "never"
+	suppressCc = "all"
+
+[credential]
+	helper = store

home/dot-kmonad/server.kbd

@@ -0,0 +1,68 @@
+(defcfg
+  input  (device-file "/dev/input/by-id/usb-046a_0011-event-kbd")
+
+  output (uinput-sink "Jonas kmonad modified output")
+  cmp-seq ralt
+  cmp-seq-delay 5
+  key-seq-delay 5
+
+  fallthrough true
+  allow-cmd true
+  implicit-around around
+)
+
+(defsrc
+  esc  f1   f2   f3   f4   f5   f6   f7   f8   f9   f10  f11  f12        ssrq slck pause
+  grv  1    2    3    4    5    6    7    8    9    0    -    =    bspc  ins  home pgup  nlck kp/  kp*  kp-
+  tab  q    w    e    r    t    y    u    i    o    p    [    ]    ret   del  end  pgdn  kp7  kp8  kp9  kp+
+  caps a    s    d    f    g    h    j    k    l    ;    '    \                          kp4  kp5  kp6
+  lsft 102d z    x    c    v    b    n    m    ,    .    /    rsft            up         kp1  kp2  kp3  kprt
+  lctl lmet lalt           spc                 ralt rmet cmp  rctl       left down rght  kp0  kp.
+)
+
+(defalias
+  caps (tap-hold-next 200 esc lctl)
+
+  symbols (layer-toggle symbols)
+
+  neo (layer-switch neo)
+  specials (layer-toggle specials)
+  default (layer-switch default)
+)
+
+(deflayer default
+  esc            f1    f2   f3   f4   f5   f6   f7   f8   f9               f10         f11   f12  ssrq   XX   XX
+  grv    1          2    3    4    5    6    7    8    9    0                -          =    bspc XX   XX   XX    XX XX XX XX
+  tab   q          w    e    r    t    y    u    i    o    p                [          ]    ret  XX   XX   XX    XX XX XX XX
+  @caps a          s    d    f    g    h    j    k    l    ; @symbols          @symbols                         XX XX XX
+  rsft  @specials  z    x    c    v    b    n    m    ,    .                /           rsft            up         XX XX XX XX
+  @neo    lalt         lmet           spc                 lalt XX               XX          XX         left down rght  XX XX 
+)
+
+;; Inspired from neo, graphite and enthium
+(deflayer neo
+  esc         f1   f2   f3   f4   f5   f6   f7   f8   f9            f10       f11   f12  ssrq   XX   XX
+  XX    1          2    3    4    5    6    7    8    9    0             XX        XX    bspc XX   XX   XX    XX XX XX XX
+  tab   b          l    d    w    z    _    f    o    u    j             XX        XX    ret     XX   XX   XX    XX XX XX XX
+  @caps n          r    t    s    g    y    h    a    e    i  @symbols        @symbols                         XX XX XX
+  lsft  @specials  q    x    m    c    v    k    p    _    _             _         rsft            up         XX XX XX XX
+  @default    lalt         lmet           spc                 lalt XX            XX        XX         left down rght  XX XX 
+)
+
+(deflayer symbols
+  _    _    _    _    _    _    _    _    _    _    _    _    _          _    _    _
+  _    _    _    _    _    _    _    _    _    _    _    _    _    _     _    _    _    _    _    _    _
+  -    \    /    [    ]    ^    !    <    >    @    _    _    _    _     _    _    _    _    _    _    _
+  =    '    "    {    }    *    ?    \(   \)   _   _    _    _                         _    _    _
+  _    _    #    $    |    ~    `    +    %    _    _    _    _               _         _    _    _    _
+  _    _    &              \_                  _    _    _    _          _    _    _    _    _
+)
+
+(deflayer specials
+  _    _    _    _    _    _    _    _    _    _    _    _    _          _    _    _
+  _    _    _    _    _    _    _    _    _    _    _    _    _    _     _    _    _    _    _    _    _
+  _    _    pgdn    up    pgup    _    _    _    _    _    _    _    _    _     _    _    _    _    _    _    _
+  _    _    left    down    rght    _    _    ä    ö    ü    ß    _    _                         _    _    _
+  _    _    _    _    _    _    _    _    _    _    _    _    _               _         _    _    _    _
+  _    _    _              _                   _    _    _    _          _    _    _    _    _
+)

home/dot-mbsyncrc

@@ -0,0 +1,27 @@
+# Global configuration section
+#   Values here are used as defaults for any following Channel section that
+#   doesn't specify them.
+Expunge None
+Create Both
+
+# More sections follow
+#
+# !!!! Note that empty lines delimit sections !!!!
+
+MaildirStore local
+Path ~/mail/mbsync
+Trash Trash
+
+IMAPStore gmx
+Host imap.gmx.net
+User jonashahn1@gmx.net
+PassCmd "pass gmximap"
+
+Channel gmx
+Far :gmx:
+Near :local:gmx
+MaxMessages 150
+MaxSize 200k
+
+Group boxes
+Channels gmx

home/dot-mutt/muttrc

@@ -0,0 +1,6 @@
+source ~/.mutt-mailboxes
+folder-hook Personal set from="youremail@personal.com"
+folder-hook Work set from="youremail@work.com"
+set mbox_type=Maildir
+set folder=$HOME/mail/offline
+set spoolfile=+INBOX

home/dot-newsboat/config

@@ -1,13 +1,28 @@
 # Rss reader newsboat
-
 max-items 100
 browser w3m
 show-read-feeds no
 
-# Setting the theme
+# Newsboat colour scheme to work with the Gruvbox palette
-color info color255 color100
+# Inspired by the vim theme https://github.com/morhetz/gruvbox
-color listfocus color255 color11
+# Tested with the Kitty gruvbox terminal colour scheme
-color listfocus_unread color255 color11
+# https://github.com/wdomitrz/kitty-gruvbox-theme
+
+color background          color223   color0
+color listnormal          color223   color0
+color listnormal_unread   color2     color0
+color listfocus           color223   color237
+color listfocus_unread    color223   color237
+color info                color75     color0
+color article             color223   color0
+
+# highlights
+highlight article "^(Feed|Link):.*$" color11 default bold
+highlight article "^(Title|Date|Author):.*$" color11 default bold
+highlight article "https?://[^ ]+" color2 default underline
+highlight article "\\[[0-9]+\\]" color2 default bold
+highlight article "\\[image\\ [0-9]+\\]" color2 default bold
+highlight feedlist "^─.*$" color6 color6 bold
 
 # The prefix key is , so you have to press comma before any macros
 # Remember to change the browser here when changing the default browser

home/dot-newsboat/urls

@@ -3,3 +3,4 @@ https://www.tagesschau.de/inland/regional/bremen/index~rss2.xml
 https://www.tagesschau.de/wirtschaft/weltwirtschaft/index~rss2.xml
 https://www.tagesschau.de/wissen/forschung/index~rss2.xml
 https://www.welt.de/feeds/latest.rss
+https://git.sr.ht/~ascyii/HutTest/log/rss.xml

home/dot-notmuch-config

@@ -0,0 +1,80 @@
+# .notmuch-config - Configuration file for the notmuch mail system
+#
+# For more information about notmuch, see https://notmuchmail.org
+# Database configuration
+#
+# Supported values are 'mail_root' and 'path'. The recommended option
+# is to set 'mail_root' to the directory where your mail currently exists
+# and to where mail will be delivered in the future. Files should be
+# individual email messages. By default notmuch will store its database
+# in $XDG_DATA_HOME/notmuch; you can override this by setting 'path'.
+# If only 'path' is set, this directory is for 'mail_root' and for
+# the database location (in a subdirectory called ".notmuch").
+#
+[database]
+# User configuration
+#
+# Here is where you can let notmuch know how you would like to be
+# addressed. Valid settings are
+#
+#	name		Your full name.
+#	primary_email	Your primary email address.
+#	other_email	A list (separated by ';') of other email addresses
+#			at which you receive email.
+#
+# Notmuch will use the various email addresses configured here when
+# formatting replies. It will avoid including your own addresses in the
+# recipient list of replies, and will set the From address based on the
+# address to which the original email was addressed.
+#
+[user]
+name=Jonas Hahn
+primary_email=jonashahn1@gmx.net
+other_email=jonas@hahn1.one
+# Configuration for "notmuch new"
+#
+# The following options are supported here:
+#
+#	tags	A list (separated by ';') of the tags that will be
+#		added to all messages incorporated by "notmuch new".
+#
+#	ignore	A list (separated by ';') of file and directory names
+#		that will not be searched for messages by "notmuch new".
+#
+#		NOTE: *Every* file/directory that goes by one of those
+#		names will be ignored, independent of its depth/location
+#		in the mail store.
+#
+[new]
+# Search configuration
+#
+# The following option is supported here:
+#
+#	exclude_tags
+#		A ;-separated list of tags that will be excluded from
+#		search results by default.  Using an excluded tag in a
+#		query will override that exclusion.
+#
+[search]
+# Maildir compatibility configuration
+#
+# The following option is supported here:
+#
+#	synchronize_flags      Valid values are true and false.
+#
+#	If true, then the following maildir flags (in message filenames)
+#	will be synchronized with the corresponding notmuch tags:
+#
+#		Flag	Tag
+#		----	-------
+#		D	draft
+#		F	flagged
+#		P	passed
+#		R	replied
+#		S	unread (added when 'S' flag is not present)
+#
+#	The "notmuch new" command will notice flag changes in filenames
+#	and update tags, while the "notmuch tag" and "notmuch restore"
+#	commands will notice tag changes and update flags in filenames
+#
+[maildir]

home/dot-offlineimap.py

@@ -0,0 +1,5 @@
+#! /usr/bin/env python
+from subprocess import check_output
+
+def get_pass(account):
+    return check_output("pass " + account, shell=True).splitlines()[0]

home/dot-offlineimaprc

@@ -0,0 +1,47 @@
+[general]
+accounts = Uni,Gmx
+pythonfile = ~/.offlineimap.py # This is used for the password script
+
+[Account Uni]
+localrepository = LocalUni
+remoterepository = RemoteUni
+
+[Repository LocalUni]
+type = Maildir
+sync_deletes = no
+localfolders = ~/mail/Uni/
+
+[Repository RemoteUni]
+sslcacertfile = /etc/ssl/certs/ca-certificates.crt
+type = IMAP
+remoteuser = ug-student\j.hahn02
+remotepasseval = get_pass("uniimap")
+sync_deletes = no
+remotehost = email.gwdg.de
+
+# Gmx account
+[Account Gmx]
+localrepository = LocalGmx
+remoterepository = RemoteGmx
+
+[Repository LocalGmx]
+type = Maildir
+sync_deletes = no
+localfolders = ~/mail/Gmx/
+
+[Repository RemoteGmx]
+type = IMAP
+remoteuser = jonashahn1@gmx.net
+remotepasseval = get_pass("gmximap")
+sslcacertfile = /etc/ssl/certs/ca-certificates.crt
+sync_deletes = no
+remotehost = imap.gmx.net
+
+[mbnames]
+enabled = yes
+filename = ~/.mutt-mailboxes
+header = "mailboxes "
+peritem = +%(accountname)s/%(foldername)s
+sep = " "
+footer = "\n"
+incremental = no

home/dot-pinerc

@@ -0,0 +1,693 @@
+#
+# Alpine configuration file
+#
+# This file sets the configuration options used by Alpine and PC-Alpine. These
+# options are usually set from within Alpine or PC-Alpine. There may be a
+# system-wide configuration file which sets the defaults for some of the
+# variables. On Unix, run alpine -conf to see how system defaults have been set.
+# For variables that accept multiple values, list elements are separated by
+# commas. A line beginning with a space or tab is considered to be a
+# continuation of the previous line. For a variable to be unset its value must
+# be blank. To set a variable to the empty string its value should be "".
+# You can override system defaults by setting a variable to the empty string.
+# Lines beginning with "#" are comments, and ignored by Alpine.
+
+# Over-rides your full name from Unix password file. Required for PC-Alpine.
+personal-name=Jonas Hahn
+
+# List of SMTP servers for sending mail. If blank: Unix Alpine uses sendmail.
+smtp-server=mail.gmx.net:587/tls/user=jonashahn1@gmx.net
+#smtp-server=mail.hahn1.one/tls/user=jonas@hahn1.one
+
+# Use the first news server I found
+# It seems actually really big
+nntp-server=news.nntp4.net/user=nntp4_2504121037
+
+# Need this to fix the default smtp server
+customized-hdrs=From: Jonas Hahn <jonashahn1@gmx.net>
+#customized-hdrs=From: Jonas Hahn <jonas@hahn1.one>
+
+# Only have gmx pattern at the moment
+# will ad the own domain in the future
+#patterns-roles=LIT:pattern="/NICK=JonasHahn1Gmx/FLDTYPE=EMAIL" action="/ROLE=1/FROM=Jonas Hahn <jonashahn1@gmx.net>/SMTP=smtp.gmx.net:\/tls/user=jonashahn1@gmx.net/RTYPE=YES/FTYPE=YES/CTYPE=NO",
+patterns-roles=LIT:pattern="/NICK=JonasHahn1Gmx/FLDTYPE=EMAIL" action="/ROLE=1/FROM=Jonas Hahn <jonashahn1@gmx.net>/SMTP=smtp.gmx.net:587/RTYPE=YES/FTYPE=YES/CTYPE=NO",
+	LIT:pattern="/NICK=JonasHahn/FLDTYPE=EMAIL" action="/ROLE=1/FROM=Jonas <jonas@hahn1.one>/SMTP=mail.hahn1.one\/tls\/user=jonas@hahn1.one/RTYPE=YES/FTYPE=YES/CTYPE=NO"
+
+# Default folder lists
+folder-collections=Mail mail/[],
+	JonasGmxMain {imap.gmx.net/ssl/user=jonashahn1@gmx.net}[],
+	JonasHahn {mail.hahn1.one/ssl/user=jonas@hahn1.one}[],
+	JonasUni {email.stud.uni-goettingen.de/ssl/user=ug-student\j.hahn02}[],
+	NewsOnNNTP4 {news.nntp4.net/user=nntp4_2504121037/nntp}#news.[],
+	JonasWeb {imap.web.de/ssl/user=jonasahorn@web.de}[]
+
+# Set by Alpine; controls beginning-of-month sent-mail pruning.
+last-time-prune-questioned=125.12
+last-version-used=6.26
+
+user-domain=hahn1.one
+# This has do be disabled for authentication on some serves
+disable-these-authenticators=GSSAPI
+url-viewers=/run/current-system/sw/bin/firefox
+dead-letter-files=0
+
+# NNTP server for posting news. Also sets news-collections for news reading.
+
+# Path of (local or remote) INBOX, e.g. ={mail.somewhere.edu}inbox
+# Normal Unix default is the local INBOX (usually /usr/spool/mail/$USER).
+inbox-path=
+
+# List of folder pairs; the first indicates a folder to archive, and the
+# second indicates the folder read messages in the first should
+# be moved to.
+incoming-archive-folders=
+
+# List of folders, assumed to be in first folder collection,
+# offered for pruning each month.  For example: mumble
+pruned-folders=
+
+# Over-rides default path for sent-mail folder, e.g. =old-mail (using first
+# folder collection dir) or ={host2}sent-mail or ="" (to suppress saving).
+# Default: sent-mail (Unix) or SENTMAIL.MTX (PC) in default folder collection.
+default-fcc=sent-mail
+
+# Over-rides default path for saved-msg folder, e.g. =saved-messages (using 1st
+# folder collection dir) or ={host2}saved-mail or ="" (to suppress saving).
+# Default: saved-messages (Unix) or SAVEMAIL.MTX (PC) in default collection.
+default-saved-msg-folder=
+
+# Over-rides default path for postponed messages folder, e.g. =pm (which uses
+# first folder collection dir) or ={host4}pm (using home dir on host4).
+# Default: postponed-msgs (Unix) or POSTPOND.MTX (PC) in default fldr coltn.
+postponed-folder=
+
+# If set, specifies where already-read messages will be moved upon quitting.
+read-message-folder=
+
+# If set, specifies where form letters should be stored.
+form-letter-folder=
+
+# If set, specifies where trash is moved to in Web Alpine.
+trash-folder=
+
+# Contains the actual signature contents as opposed to the signature filename.
+# If defined, this overrides the signature-file. Default is undefined.
+literal-signature=
+
+# Over-rides default path for signature file. Default is ~/.signature
+signature-file=
+
+# List of features; see Alpine's Setup/options menu for the current set.
+# e.g. feature-list= select-without-confirm, signature-at-bottom
+# Default condition for all of the features is no-.
+feature-list=
+
+# Alpine executes these keys upon startup (e.g. to view msg 13: i,j,1,3,CR,v)
+initial-keystroke-list=
+
+# Only show these headers (by default) when composing messages
+default-composer-hdrs=
+
+# When viewing messages, include this list of headers
+viewer-hdrs=
+
+# When viewing messages, number of blank spaces between left display edge and text
+viewer-margin-left=
+
+# When viewing messages, number of blank spaces between right display edge and text
+viewer-margin-right=
+
+# When viewing messages, number of lines of quote displayed before suppressing
+quote-suppression-threshold=
+
+# Determines default folder name for Saves...
+# Choices: default-folder, by-sender, by-from, by-recipient, last-folder-used.
+# Default: "default-folder", i.e. "saved-messages" (Unix) or "SAVEMAIL" (PC).
+saved-msg-name-rule=
+
+# Determines default name for Fcc...
+# Choices: default-fcc, by-recipient, last-fcc-used.
+# Default: "default-fcc" (see also "default-fcc=" variable.)
+fcc-name-rule=
+
+# Sets presentation order of messages in Index. Choices:
+# Subject, From, Arrival, Date, Size, To, Cc, OrderedSubj, Score, and Thread.
+# Order may be reversed by appending /Reverse. Default: "Arrival".
+sort-key=
+
+# Sets presentation order of address book entries. Choices: dont-sort,
+# fullname-with-lists-last, fullname, nickname-with-lists-last, nickname
+# Default: "fullname-with-lists-last".
+addrbook-sort-rule=
+
+# Sets presentation order of folder list entries. Choices: alphabetical,
+# alpha-with-dirs-last, alpha-with-dirs-first.
+# Default: "alpha-with-directories-last".
+folder-sort-rule=
+
+# Sets the default folder and collection offered at the Goto Command's prompt.
+goto-default-rule=
+
+# Sets message which cursor begins on. Choices: first-unseen, first-recent,
+# first-important, first-important-or-unseen, first-important-or-recent,
+# first, last. Default: "first-unseen".
+incoming-startup-rule=
+
+# Allows a default answer for the prune folder questions. Choices: yes-ask,
+# yes-no, no-ask, no-no, ask-ask, ask-no. Default: "ask-ask".
+pruning-rule=
+
+# Controls behavior when reopening an already open folder.
+folder-reopen-rule=
+
+# Style that MESSAGE INDEX is displayed in when threading.
+threading-display-style=
+
+# Style of THREAD INDEX or default MESSAGE INDEX when threading.
+threading-index-style=
+
+# When threading, character used to indicate collapsed messages underneath.
+threading-indicator-character=
+
+# When threading, character used to indicate expanded messages underneath.
+threading-expanded-character=
+
+# When threading, character used to indicate this is the last reply
+# to the parent of this message.
+threading-lastreply-character=
+
+# Reflects capabilities of the display you have.
+# If unset, the default is taken from your locale. That is usually the right
+# thing to use. Typical alternatives include UTF-8, ISO-8859-x, and EUC-JP
+# (where x is a number between 1 and 9).
+display-character-set=
+
+# Reflects capabilities of the keyboard you have.
+# If unset, the default is to use the same value
+# used for the display-character-set.
+keyboard-character-set=
+
+# Defaults to UTF-8. This is used for outgoing messages.
+# It is usually correct to leave this unset.
+posting-character-set=
+
+# Defaults to nothing, which is equivalent to US-ASCII. This is used for
+# unlabeled incoming messages. It is ok to leave this unset but if you receive
+# unlabeled mail that is usually in some known character set, set that here.
+unknown-character-set=
+
+# Specifies the program invoked by ^_ in the Composer,
+# or the "enable-alternate-editor-implicitly" feature.
+editor=
+
+# Specifies the program invoked by ^T in the Composer.
+speller=
+
+# Specifies the column of the screen where the composer should wrap.
+composer-wrap-column=
+
+# Specifies the string to insert when replying to a message.
+reply-indent-string=
+
+# Specifies the introduction to insert when replying to a message.
+reply-leadin=
+
+# Specifies the string to replace quotes with when viewing a message.
+quote-replace-string=
+
+# When these characters appear in the middle of a word in the composer
+# the forward word function will stop at the first text following (as happens
+# with SPACE characters by default)
+composer-word-separators=
+
+# Specifies the string to use when sending a  message with no to or cc.
+empty-header-message=
+
+# Program to view images (e.g. GIF or TIFF attachments).
+image-viewer=
+
+# If "user-domain" not set, strips hostname in FROM address. (Unix only)
+use-only-domain-name=
+
+# This variable takes a list of programs that message text is piped into
+# after MIME decoding, prior to display.
+display-filters=
+
+# This defines a program that message text is piped into before MIME
+# encoding, prior to sending
+sending-filters=
+
+# A list of alternate addresses the user is known by
+alt-addresses=
+
+# A list of keywords for use in categorizing messages
+keywords=
+
+# Characters which surround keywords in SUBJKEY token.
+# Default is "{" "} "
+keyword-surrounding-chars=
+
+# Characters between subject and opening text in SUBJECTTEXT token.
+# Default is " - "
+opening-text-separator-chars=
+
+# This is a list of formats for address books.  Each entry in the list is made
+# up of space-delimited tokens telling which fields are displayed and in
+# which order.  See help text
+addressbook-formats=
+
+# This gives a format for displaying the index.  It is made
+# up of space-delimited tokens telling which fields are displayed and in
+# which order.  See help text
+index-format=
+
+# The number of lines of overlap when scrolling through message text
+viewer-overlap=
+
+# Number of lines from top and bottom of screen where single
+# line scrolling occurs.
+scroll-margin=
+
+# The number of seconds to sleep after writing a status message
+status-message-delay=
+
+# Number of times per-second to update busy cue messages
+busy-cue-rate=
+
+# The approximate number of seconds between checks for new mail
+mail-check-interval=
+
+# The approximate number of seconds between checks for new mail in folders
+# other than the current folder and inbox.
+# Default is same as mail-check-interval
+mail-check-interval-noncurrent=
+
+# The minimum number of seconds between checks for new mail in a Mail Drop.
+# This is always effectively at least as large as the mail-check-interval
+maildrop-check-minimum=
+
+# For newsgroups accessed using NNTP, only messages numbered in the range
+# lastmsg-range+1 to lastmsg will be considered
+nntp-range=100
+
+# Full path and name of NEWSRC file
+newsrc-path=
+
+# Path and filename of news configuration's active file.
+# The default is typically "/usr/lib/news/active".
+news-active-file-path=
+
+# Directory containing system's news data.
+# The default is typically "/usr/spool/news"
+news-spool-directory=
+
+# Path and filename of the program used to upload text from your terminal
+# emulator's into Alpine's composer.
+upload-command=
+
+# Text sent to terminal emulator prior to invoking the program defined by
+# the upload-command variable.
+# Note: _FILE_ will be replaced with the temporary file used in the upload.
+upload-command-prefix=
+
+# Path and filename of the program used to download text via your terminal
+# emulator from Alpine's export and save commands.
+download-command=
+
+# Text sent to terminal emulator prior to invoking the program defined by
+# the download-command variable.
+# Note: _FILE_ will be replaced with the temporary file used in the download.
+download-command-prefix=
+
+# Sets the search path for the mailcap configuration file.
+# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
+mailcap-search-path=
+
+# Sets the search path for the mimetypes configuration file.
+# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
+mimetype-search-path=
+
+# Sets the path for the system ssl certificates issued by a trusted
+# certificate authority. Note that this could be a list of paths, if the same
+# pinerc is used in different systems. Alpine always chooses the first one that
+# it finds. Value must be an absolute path.
+system-certs-path=
+
+# Sets the path for the system ssl file container of certificates issued by a
+# certificate authority. Note that this could be a list of container files,
+# if the same pinerc is used in different systems. Alpine always chooses the,
+# first one that it finds. Value must be an absolute path.
+system-certs-file=
+
+# Sets the path for a file that contains certificates that a user trusts.
+#Note that this could be a list of container files,
+# if the same pinerc is used in different systems. Alpine always chooses the,
+# first one that it finds. Value must be an absolute path.
+user-certs-path=
+
+# Sets the path for a file that contains certificates that a user trusts.
+#Note that this could be a list of container files,
+# if the same pinerc is used in different systems. Alpine always chooses the,
+# first one that it finds. Value must be an absolute path.
+user-certs-file=
+
+# Colon separated list of ciphers that should be negotiated with the remote
+# ssl server upon connection.
+ssl-ciphers=
+
+# List of directories that are preferred locations to save or export attachments.
+default-directories=~/mail/export
+
+# The maximum number of non-stayopen remote connections that Alpine will use
+max-remote-connections=
+
+# A list of folders that should be left open once opened (INBOX is implicit)
+stay-open-folders=
+
+# Sets the time in seconds that Alpine will attempt to open a network
+# connection when checking for new unseen messages in an incoming folder.
+#  The default is 5.
+incoming-check-timeout=
+
+# Sets the approximate number of seconds between checks for unseen messages
+# in incoming folders. The default is 180.
+incoming-check-interval=
+
+# Sets the approximate number of seconds between checks for unseen messages
+# for other than local or IMAP folders. The default is 180.
+incoming-check-interval-secondary=
+
+# List of incoming folders to check for unseen messages. The default if left
+# blank is to check all incoming folders.
+incoming-check-list=
+
+# Specifies the number of dead letter files to keep when canceling.
+
+# Sets the filename for the newmail fifo (named pipe). Unix only.
+newmail-fifo-path=
+
+# Sets the width for the NewMail screen.
+newmail-window-width=
+
+# List of incoming msg folders besides INBOX, e.g. ={host2}inbox, {host3}inbox
+# Syntax: optnl-label {optnl-imap-host-name}folder-path
+incoming-folders=
+
+# List, only needed if nntp-server not set, or news is on a different host
+# than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[]
+# Syntax: optnl-label *{news-host/protocol}[]
+#news-collections=News {news.nntp4.net/user=nntp4_2504121037/nntp}#news.[]
+
+# List of file or path names for personal addressbook(s).
+# Default: ~/.addressbook (Unix) or \PINE\ADDRBOOK (PC)
+# Syntax: optnl-label path-name
+address-book=
+
+# List of file or path names for global/shared addressbook(s).
+# Default: none
+# Syntax: optnl-label path-name
+global-address-book=
+
+# This names the path to an alternative program, and any necessary arguments,
+# to be used in posting mail messages.  Example:
+#                    /usr/lib/sendmail -oem -t -oi
+# or,
+#                    /usr/local/bin/sendit.sh
+# The latter a script found in Alpine distribution's contrib/util directory.
+# NOTE: The program MUST read the message to be posted on standard input,
+#       AND operate in the style of sendmail's "-t" option.
+sendmail-path=
+
+# This names the root of the tree to which the user is restricted when reading
+# and writing folders and files.  For example, on Unix ~/work confines the
+# user to the subtree beginning with their work subdirectory.
+# (Note: this alone is not sufficient for preventing access.  You will also
+# need to restrict shell access and so on, see Alpine Technical Notes.)
+# Default: not set (so no restriction)
+operating-dir=
+
+# If no user input for this many hours, Alpine will exit if in an idle loop
+# waiting for a new command.  If set to zero (the default), then there will
+# be no timeout.
+user-input-timeout=
+
+# Sets the time in seconds that Alpine will attempt to open a network
+# connection.  The default is 30, the minimum is 5, and the maximum is
+# system defined (typically 75).
+tcp-open-timeout=
+
+# Network read warning timeout. The default is 15, the minimum is 5, and the
+# maximum is 1000.
+tcp-read-warning-timeout=
+
+# Network write warning timeout. The default is 0 (unset), the minimum
+# is 5 (if not 0), and the maximum is 1000.
+tcp-write-warning-timeout=
+
+# If this much time has elapsed at the time of a tcp read or write
+# timeout, Alpine will ask if you want to break the connection.
+# Default is 60 seconds, minimum is 5, maximum is 1000.
+tcp-query-timeout=
+
+# If this much time has elapsed at the time of a tcp read or write timeout,
+# Alpine will close the connection automatically without user intervention.
+# Setting this value to zero (the default) disables this. Setting this variable
+# to a smaller value than tcp-query-timeout will close the connection
+# automatically, and you will never be asked if you want to wait.
+close-connection-timeout=
+
+# Sets the format of the command used to open a UNIX remote
+# shell connection.  The default is "%s %s -l %s exec /etc/r%sd"
+# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
+# where the first is for the command's path, the second is for the
+# host to connect to, the third is for the user to connect as, and the
+# fourth is for the connection method (typically "imap")
+rsh-command=
+
+# Sets the name of the command used to open a UNIX remote shell connection.
+# The default is typically /usr/ucb/rsh.
+rsh-path=
+
+# Sets the time in seconds that Alpine will attempt to open a UNIX remote
+# shell connection.  The default is 15, min is 5, and max is unlimited.
+# Zero disables rsh altogether.
+rsh-open-timeout=
+
+# Sets the format of the command used to open a UNIX secure
+# shell connection.  The default is "%s %s -l %s exec /etc/r%sd"
+# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
+# where the first is for the command's path, the second is for the
+# host to connect to, the third is for the user to connect as, and the
+# fourth is for the connection method (typically "imap")
+ssh-command=
+
+# Sets the name of the command used to open a UNIX secure shell connection.
+# Typically this is /usr/bin/ssh.
+ssh-path=
+
+# Sets the time in seconds that Alpine will attempt to open a UNIX secure
+# shell connection.  The default is 15, min is 5, and max is unlimited.
+# Zero disables ssh altogether.
+ssh-open-timeout=
+
+# Sets the version number Alpine will use as a threshold for offering
+# its new version message on startup.
+new-version-threshold=
+
+# List of mail drivers to disable.
+disable-these-drivers=
+
+# A range in the form min,max that sets the minimum amd maximum versions of the
+# SSL protocol that Alpine will use when connecting to a secure server.
+encryption-protocol-range=
+
+# Set by Alpine; contains data for caching remote address books.
+remote-abook-metafile=
+
+# How many extra copies of remote address book should be kept. Default: 3
+remote-abook-history=
+
+# Minimum number of minutes between checks for remote address book changes.
+# 0 means never check except when opening a remote address book.
+# -1 means never check. Default: 5
+remote-abook-validity=
+
+# Your default printer selection
+printer=
+
+# List of special print commands
+personal-print-command=
+
+# Which category default print command is in
+personal-print-category=
+
+# Your client-id and client-secret information to authenticate using XOAUTH2
+xoauth2-info=
+
+# Patterns and their actions are stored here.
+
+# Patterns and their actions are stored here.
+patterns-filters2=
+
+# Patterns and their actions are stored here.
+patterns-scores2=
+
+# Patterns and their actions are stored here.
+patterns-indexcolors=
+
+# Patterns and their actions are stored here.
+patterns-other=
+
+# Patterns and their actions are stored here.
+patterns-search=
+
+# Controls display of color
+color-style=
+
+# Controls display of color for current index line
+current-indexline-style=
+
+# Controls display of color for the titlebar at top of screen
+titlebar-color-style=
+
+# Choose: black, blue, green, cyan, red, magenta, yellow, or white.
+normal-foreground-color=
+normal-background-color=
+reverse-foreground-color=
+reverse-background-color=
+title-foreground-color=
+title-background-color=
+title-closed-foreground-color=
+title-closed-background-color=
+folder-foreground-color=
+folder-background-color=
+directory-foreground-color=
+directory-background-color=
+folder-list-text-foreground-color=
+folder-list-text-background-color=
+status-foreground-color=
+status-background-color=
+keylabel-foreground-color=
+keylabel-background-color=
+keyname-foreground-color=
+keyname-background-color=
+selectable-item-foreground-color=
+selectable-item-background-color=
+meta-message-foreground-color=
+meta-message-background-color=
+quote1-foreground-color=
+quote1-background-color=
+quote2-foreground-color=
+quote2-background-color=
+quote3-foreground-color=
+quote3-background-color=
+incoming-unseen-foreground-color=
+incoming-unseen-background-color=
+signature-foreground-color=
+signature-background-color=
+prompt-foreground-color=
+prompt-background-color=
+header-general-foreground-color=
+header-general-background-color=
+index-to-me-foreground-color=
+index-to-me-background-color=
+index-important-foreground-color=
+index-important-background-color=
+index-deleted-foreground-color=
+index-deleted-background-color=
+index-answered-foreground-color=
+index-answered-background-color=
+index-new-foreground-color=
+index-new-background-color=
+index-recent-foreground-color=
+index-recent-background-color=
+index-forward-foreground-color=
+index-forward-background-color=
+index-unseen-foreground-color=
+index-unseen-background-color=
+index-highpriority-foreground-color=
+index-highpriority-background-color=
+index-lowpriority-foreground-color=
+index-lowpriority-background-color=
+index-arrow-foreground-color=
+index-arrow-background-color=
+index-subject-foreground-color=
+index-subject-background-color=
+index-from-foreground-color=
+index-from-background-color=
+index-opening-foreground-color=
+index-opening-background-color=
+
+# Colors in which tokens will be displayed in the index screen
+index-token-colors=
+
+# When viewing messages, these are the header colors
+viewer-hdr-colors=
+
+# Colors used to display keywords in the index
+keyword-colors=
+
+# Public certificates are kept in files in this directory. The files should
+# contain certificates in PEM format. The name of each file should look
+# like <emailaddress>.crt. The default directory is .alpine-smime/public.
+smime-public-cert-directory=
+
+# If this option is set then public certificates are kept in a single container
+# "file" similar to a remote configuration file instead of in the
+# smime-publiccert-directory. The value can be a remote or local folder
+# specification like for a non-standard pinerc value. The default
+# is that it is not set.
+smime-public-cert-container=
+
+# Private keys are kept in files in this directory. The files are in PEM format.
+# The name of a file should look like <emailaddress>.key.
+# The default directory is .alpine-smime/private.
+smime-private-key-directory=
+
+# If this option is set then private keys are kept in a single container
+# "file" similar to a remote configuration file instead of in the
+# private-key-directory. The value can be a remote or local folder
+# specification like for a non-standard pinerc value. The default
+# is that it is not set.
+smime-private-key-container=
+
+# Certificate Authority certificates (in addition to the normal CACerts for the
+# system) are kept in files in this directory. The files are in PEM format.
+# Filenames should end with .crt. The default directory is .alpine-smime/ca.
+smime-cacert-directory=
+
+# If this option is set then CAcerts are kept in a single container
+# "file" similar to a remote configuration file instead of in the
+# ca-cert-directory. The value can be a remote or local folder
+# specification like for a non-standard pinerc value. The default
+# is that it is not set.
+smime-cacert-container=
+
+# LDAP servers for looking up addresses.
+ldap-servers=
+
+# RSS News feed
+rss-news=
+
+# RSS Weather feed
+rss-weather=
+
+# Web Alpine index table row height
+wp-indexheight=
+
+# Web Alpine number of index lines in table
+wp-indexlines=
+
+# Web Alpine aggregate operations tab state
+wp-aggstate=
+
+# Web Alpine various aspects of cross-session state
+wp-state=
+
+# Web Alpine preferred width for message display in characters
+wp-columns=
+
+# List, only needed if nntp-server not set, or news is on a different host
+# than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[]
+# Syntax: optnl-label *{news-host/protocol}[]
+news-collections=

home/dot-ssh/config

@@ -8,6 +8,15 @@ Host amazon
 	User ec2-user
 	IdentityFile ~/.ssh/id_amazon
 
+Host harch
+	Hostname 192.168.178.20
+	User jonas
+	IdentityFile ~/.ssh/id_amazon
+
+Host git.sr.ht
+	Hostname git.sr.ht
+	User git
+	IdentityFile ~/.ssh/id_srht
 
 Host gitlab.gwdg.de
 	HostName gitlab.gwdg.de

home/dot-tmux.conf

@@ -2,6 +2,7 @@
 set -g base-index 1
 setw -g pane-base-index 1
 set-window-option -g mode-keys vi
+#set-option -g default-shell "/usr/bin/env zsh"
 
 # Switch to another git repo
 bind-key u new-window -d -n fzf-switcher "bash -c '~/projects/scripts/find_gits.sh; exit'" \; select-window -t fzf-switcher
@@ -19,7 +20,6 @@ set -g default-terminal "tmux-256color"
 
 # Left side: Show window list
 set-option -g status-left ""
-#set-option -g default-shell "/bin/zsh"
 set -g mouse off
 
 # Right side: Show full session name

home/dot-zshrc

@@ -5,6 +5,9 @@ export TERM="alacritty"
 bindkey '^R' history-incremental-search-backward
 bindkey -v
 
+alias cat="bat"
+alias ls="exa"
+
 function rgnvim() {
   rg --vimgrep "$@" \
     | fzf --delimiter : --nth 1,2,3,4 \
@@ -79,4 +82,5 @@ fi
 export PATH=/home/jonas/.opencode/bin:$PATH
 
 # Added by GitLab Knowledge Graph installer
+# Wird auch von uv genutzt
 export PATH="$HOME/.local/bin:$PATH"

resolve.sh

@@ -1,16 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-pkg="$1"
-
-stow --dotfiles --no "$pkg" 2>&1 |
-	grep 'cannot stow' |
-	sed -E 's/.*existing target ([^ ]+).*/\1/' |
-	while read -r f; do
-		echo "Removing $HOME/$f with force"
-		rm -rf -- "$HOME/$f"
-	done
-
-stow --dotfiles "$pkg"
-echo "Stowed $pkg"

stow.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-
-stow -v --dotfiles $1